8IN1 15×15 Combo T-Shirt Heat Press Transfer Mug Plate Machine Multifunctional

8IN1 15x15 Combo T-Shirt Heat Press Transfer Mug Plate Machine Multifunctional

8IN1 15x15 Combo T-Shirt Heat Press Transfer Mug Plate Machine Multifunctional

8IN1 15x15 Combo T-Shirt Heat Press Transfer Mug Plate Machine Multifunctional

8IN1 15x15 Combo T-Shirt Heat Press Transfer Mug Plate Machine Multifunctional

8IN1 15x15 Combo T-Shirt Heat Press Transfer Mug Plate Machine Multifunctional

8IN1 15x15 Combo T-Shirt Heat Press Transfer Mug Plate Machine Multifunctional

8IN1 15x15 Combo T-Shirt Heat Press Transfer Mug Plate Machine Multifunctional

8IN1 15x15 Combo T-Shirt Heat Press Transfer Mug Plate Machine Multifunctional

8IN1 15x15 Combo T-Shirt Heat Press Transfer Mug Plate Machine Multifunctional

8IN1 15x15 Combo T-Shirt Heat Press Transfer Mug Plate Machine Multifunctional

8IN1 15x15 Combo T-Shirt Heat Press Transfer Mug Plate Machine Multifunctional

8IN1 15x15 Combo T-Shirt Heat Press Transfer Mug Plate Machine Multifunctional

For more information on our products. Please send message to us. 8 in 1 Heat Press Machine for t shirts Machine Combo Kit Swing Away Sublimation. What Customers Have To About Us. Delivered as promised and item is as described. Just what i was looking for. Had a problem-was able to successfully resolve it. This 8 in 1 heat press machine can be used for T-shirts, caps, ceramic plates, ceramic tiles, mugs, coasters, mouse pads, jigsaw puzzles, lettering, other misc, fabrics & materials. It can transfer colorful pictures and characters of sublimating and dissolved printing ink onto ceramics, glasses and textiles such as cotton, flax, chemical fiber, nylon, etc. This all-in-one press includes flat platen, mugs and plates. The swing-away heat press boasts all of the must-have attachments. It has a built-in Teflon coated 15inch x 15inch (38 x 38cm) heat platen with a full range of heating coils to allow for consistency throughout its surface. The digital timer control is adjustable up to 999 seconds. The features a digital temperature gauge ranging from 0 – 250ºC (about 480ºF). Large 15″ x 15″ transfer element – The 15″ x 15″ (38 x 38cm) heat platen provides a big surface to transfer onto flat surfaced items such as T-shirts, ceramic plates, mouse pads, jigsaw puzzles etc. Digital LED controller – Preset the desired temperature and timer. Intelligent audible alarm after the transfer done. Full 360-degree rotation of swing-away design – Allows the heating element to be moved safely aside and reduce the chances of accidental contact. Full-range pressure-adjustment knob – This allows the pressure to be adjusted according to the thickness of the material you’re transferring to. Teflon-coated platen press element – The surface is non-stick, preventing scorching of transfers, and does not require a separate silicone/teflon sheet. 2 4/5inch Long arm handle- Comfortable rubber grip for everyday use and long production runs. Detachable lower platform – It is elevated with dual supports. Adjustable multi-spring balancer – Allows pressure to be more evenly distributed across the entire platen when it is closed. 4/5inch thick heating board – Built-in structural support to maintain flatness. Warm up quickly and offer even heating. Application: This heat press machine enjoys multifunctions in one machine, it can be used for transferring on t-shirt, mug, plate, cap and so on. Moreover the heating accessory can be joined. It can swing-away 180 degrees and is convenient to take off the transferred materials and can be used for transferring on certain thick materials. You can replace the heating plate easily and conveniently without using any special tools. Temperature setting: Press SET , the upper display will showing SP , and the lower of display will showing the temperature of last setting. Then enter into temperature setting option, press or (increase or decrease) to set the needed temperature. After setting well, please press SET , the upper display will show SK to go on the next step for time setting Time setting: Press SET again, H1 LDE will showing ST , then enter into the time setting. Press or (increase or decrease) to setting the needed time. (Normally the time is 180 seconds for mugs and 15-20 seconds for t shirt printing) Fault diagnosis and solution: 1. If the controller box showing nothing when power on, there are 2 solutions: a. Please check the fuse wire, checking the glass wire to see if the wire damaged or fusing, if damaged, please change the wire. Open up the back cover of controller box, and examine the electricity box, to see if some thread fall off or not, if fall off, please match it accordingly. When power on, if the controller display showing 3 lines, please take out the heating platen, and replaced it with another heating panel, or mug heater. If the display is normal, then maybe is the second situation of b , the thread wire were disconnect. If still showing 3 line, then is the first situation of a , the socket wire were fall out or break. Checking the inner wire of controller box, the white metal socket with 4 lines, please check if the thread is break or disconnect, if disconnect, please match it accordingly or replace it. Checking the wire of heating panel , the red cycle is showing the ends of the cable, one end is 3 thread, please replace 2 thread will be okay. When power on, the controller box showing values but cannot heating up: the display showing the actual rooms temperature, please takes out the plug of head machine, and replaced it with other mugs heater or plate heater. If temperature is heating up normally, then will be the next situation a , if cannot heat up, will be b situation. Checking the heating wire, the red cycle showing the ends of thread, please replace the white thread will ok. Open up the back cover, and examine the thread to see if some thread disconnected or break, if disconnected, please follow the above a , if nothing showing, please following b to maintenance. If no break, then replace the controller box. The head controller box heating up normally, the other parts will be not heating up, please change the heating part directly. The head machines function is ok, but cannot count down, then please press the third button, this machine will count down. If still cannot count down, please replace the controller box. This heat press machine enjoys multifunctions in one machine, it can be used for transferring on t-shirt, mug, plate, cap and so on. Advanced Characters: Fahrenheit and Celsius scale are selectable Adjustable multi-spring balancer Allows pressure to be more evenly distributed across the entire platen when it is closed 4/5 thick heating board Built-in structural support to maintain flatness Warm up quickly Offers even heating Upgraded aluminum alloy cradle Detached cradle for use of the mug elements Compact size and lightweight, as compared to standard mug cradles. 0 – 480ºF (0 – 250ºC). 0 – 999 Seconds. 13 1/2″ To 17″. 595 x 515 x 445mm. 15″ x 15″ (38 x 38cm). Hat / Cap Press. 6″ x 3″ (Curved). 2″-2.75″ diameter (6OZ). 3″-3.5″ diameter (11OZ). 12OZ latte mug (Cone). 17OZ latte mug (Cone). Fully-Assembled Machine With Platen Press. Removable Silicone Pad And Cotton Pad. Large 15inch x 15inch (38 x 38cm) transfer element. Digital LED temperature and time controller. Full 360-degree rotation of swing-away design. Fahrenheit and celsius scale are selectable. Teflon-coated platen press element. 2 4/5 inch long arm handle, bold handle easy to hold, save effort design. Upgraded aluminium alloy cradle. Metal and plastic construction. Sanding surface, comfortable felling. Automatic electronic timing when single table integrated, automatic alert when processes complete. Built-in fuse for safe using. Slides design make the changing of the parts easier and fast, save your time and effort. Novel, fashion, high-grade design, reasonable structure, easy operate. Adjustable feet for unevenly floor. 2 PCS Free Teflon Sheet. All items are dispatched from our warehouse in HACIENDA HEIGHTS, CA. Some products may be dispatched in more than one carton. International Buyers Please Note. These charges are the buyers responsibility. If you have a problem with the product. We will require a picture of the damaged part for verification. We offer detailed product descriptions and images to give you a real advantage in finding the products you’re looking for. 25 years Industry Experience. The item “8IN1 15×15 Combo T-Shirt Heat Press Transfer Mug Plate Machine Multifunctional” is in sale since Monday, September 16, 2019. This item is in the category “Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Heat Transfer\Presses”. The seller is “czingbazinga” and is located in Hacienda Heights, California. This item can be shipped to United States.
  • Wattage: 1100W
  • Power: 110V
  • Heap Platen: 15″x15″
  • Model: 8IN1
  • MPN: HG-025S
  • Brand: zb-living
  • Feature: Digital LCD timer and temperature control
  • Digital Timer Control: Digital timer control:

8IN1 15×15 Combo T-Shirt Heat Press Transfer Mug Plate Machine Multifunctional

8IN1 15x15 Combo T-Shirt Heat Press Transfer Mug Plate Machine Multifunctional

8IN1 15x15 Combo T-Shirt Heat Press Transfer Mug Plate Machine Multifunctional

8IN1 15x15 Combo T-Shirt Heat Press Transfer Mug Plate Machine Multifunctional

8IN1 15x15 Combo T-Shirt Heat Press Transfer Mug Plate Machine Multifunctional

8IN1 15x15 Combo T-Shirt Heat Press Transfer Mug Plate Machine Multifunctional

8IN1 15x15 Combo T-Shirt Heat Press Transfer Mug Plate Machine Multifunctional

8IN1 15x15 Combo T-Shirt Heat Press Transfer Mug Plate Machine Multifunctional

8IN1 15x15 Combo T-Shirt Heat Press Transfer Mug Plate Machine Multifunctional

8IN1 15x15 Combo T-Shirt Heat Press Transfer Mug Plate Machine Multifunctional

8IN1 15x15 Combo T-Shirt Heat Press Transfer Mug Plate Machine Multifunctional

8IN1 15x15 Combo T-Shirt Heat Press Transfer Mug Plate Machine Multifunctional

8IN1 15x15 Combo T-Shirt Heat Press Transfer Mug Plate Machine Multifunctional

For more information on our products. Please send message to us. 8 in 1 Heat Press Machine for t shirts Machine Combo Kit Swing Away Sublimation. What Customers Have To About Us. ” Delivered as promised and item is as described “. Just what i was looking for. Had a problem-was able to successfully resolve it. This 8 in 1 heat press machine can be used for T-shirts, caps, ceramic plates, ceramic tiles, mugs, coasters, mouse pads, jigsaw puzzles, lettering, other misc, fabrics & materials. It can transfer colorful pictures and characters of sublimating and dissolved printing ink onto ceramics, glasses and textiles such as cotton, flax, chemical fiber, nylon, etc. This all-in-one press includes flat platen, mugs and plates. The swing-away heat press boasts all of the must-have attachments. It has a built-in Teflon coated 15inch x 15inch (38 x 38cm) heat platen with a full range of heating coils to allow for consistency throughout its surface. The digital timer control is adjustable up to 999 seconds. The features a digital temperature gauge ranging from 0 – 250ºC (about 480ºF). Large 15″ x 15″ transfer element – The 15″ x 15″ (38 x 38cm) heat platen provides a big surface to transfer onto flat surfaced items such as T-shirts, ceramic plates, mouse pads, jigsaw puzzles etc. Digital LED controller – Preset the desired temperature and timer. Intelligent audible alarm after the transfer done. Full 360-degree rotation of swing-away design – Allows the heating element to be moved safely aside and reduce the chances of accidental contact. Full-range pressure-adjustment knob – This allows the pressure to be adjusted according to the thickness of the material you’re transferring to. Teflon-coated platen press element – The surface is non-stick, preventing scorching of transfers, and does not require a separate silicone/teflon sheet. 2 4/5inch Long arm handle- Comfortable rubber grip for everyday use and long production runs. Detachable lower platform – It is elevated with dual supports. Adjustable multi-spring balancer – Allows pressure to be more evenly distributed across the entire platen when it is closed. 4/5inch thick heating board – Built-in structural support to maintain flatness. Warm up quickly and offer even heating. Application: This heat press machine enjoys multifunctions in one machine, it can be used for transferring on t-shirt, mug, plate, cap and so on. Moreover the heating accessory can be joined. It can swing-away 180 degrees and is convenient to take off the transferred materials and can be used for transferring on certain thick materials. You can replace the heating plate easily and conveniently without using any special tools. Temperature setting: Press SET , the upper display will showing SP , and the lower of display will showing the temperature of last setting. Then enter into temperature setting option, press? Or? (increase or decrease) to set the needed temperature. After setting well, please press SET , the upper display will show SK to go on the next step for time setting Time setting: Press SET again, H1 LDE will showing ST , then enter into the time setting. Press? Or? (increase or decrease) to setting the needed time. (Normally the time is 180 seconds for mugs and 15-20 seconds for t shirt printing) Fault diagnosis and solution: 1. If the controller box showing nothing when power on, there are 2 solutions: a. Please check the fuse wire, checking the glass wire to see if the wire damaged or fusing, if damaged, please change the wire. Open up the back cover of controller box, and examine the electricity box, to see if some thread fall off or not, if fall off, please match it accordingly. When power on, if the controller display showing 3 lines, please take out the heating platen, and replaced it with another heating panel, or mug heater. If the display is normal, then maybe is the second situation of b , the thread wire were disconnect. If still showing 3 line, then is the first situation of a , the socket wire were fall out or break. Checking the inner wire of controller box, the white metal socket with 4 lines, please check if the thread is break or disconnect, if disconnect, please match it accordingly or replace it. Checking the wire of heating panel , the red cycle is showing the ends of the cable, one end is 3 thread, please replace 2 thread will be okay. When power on, the controller box showing values but cannot heating up: the display showing the actual room’s temperature, please takes out the plug of head machine, and replaced it with other mugs heater or plate heater. If temperature is heating up normally, then will be the next situation a , if cannot heat up, will be b situation. Checking the heating wire, the red cycle showing the ends of thread, please replace the white thread will ok. Open up the back cover, and examine the thread to see if some thread disconnected or break, if disconnected, please follow the above a , if nothing showing, please following b to maintenance. If no break, then replace the controller box. The head controller box heating up normally, the other parts will be not heating up, please change the heating part directly. The head machine’s function is ok, but cannot count down, then please press the third button, this machine will count down. If still cannot count down, please replace the controller box. This heat press machine enjoys multifunctions in one machine, it can be used for transferring on t-shirt, mug, plate, cap and so on. Advanced Characters: Fahrenheit and Celsius scale are selectable Adjustable multi-spring balancer Allows pressure to be more evenly distributed across the entire platen when it is closed 4/5 thick heating board Built-in structural support to maintain flatness Warm up quickly Offers even heating Upgraded aluminum alloy cradle Detached cradle for use of the mug elements Compact size and lightweight, as compared to standard mug cradles. 0 – 480ºF (0 – 250ºC). 0 – 999 Seconds. 13 1/2″ To 17″. 595 x 515 x 445mm. 15″ x 15″ (38 x 38cm). Hat / Cap Press. 6″ x 3″ (Curved). 2″-2.75″ diameter (6OZ). 3″-3.5″ diameter (11OZ). 12OZ latte mug (Cone). 17OZ latte mug (Cone). Fully-Assembled Machine With Platen Press. Removable Silicone Pad And Cotton Pad. Large 15inch x 15inch (38 x 38cm) transfer element. Digital LED temperature and time controller. Full 360-degree rotation of swing-away design. Fahrenheit and celsius scale are selectable. Teflon-coated platen press element. 2 4/5 inch long arm handle, bold handle easy to hold, save effort design. Upgraded aluminium alloy cradle. Metal and plastic construction. Sanding surface, comfortable felling. Automatic electronic timing when single table integrated, automatic alert when processes complete. Built-in fuse for safe using. Slides design make the changing of the parts easier and fast, save your time and effort. Novel, fashion, high-grade design, reasonable structure, easy operate. Adjustable feet for unevenly floor. 2 PCS Free Teflon Sheet. All items are dispatched from our warehouse in HACIENDA HEIGHTS, CA. Some products may be dispatched in more than one carton. International Buyers – Please Note. If you have a problem with the product. We will require a picture of the damaged part for verification. We offer detailed product descriptions and images to give you a real advantage in finding the products you’re looking for. 25 years Industry Experience. The item “8IN1 15×15 Combo T-Shirt Heat Press Transfer Mug Plate Machine Multifunctional” is in sale since Friday, September 13, 2019. This item is in the category “Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Heat Transfer\Presses”. The seller is “czingbazinga” and is located in Hacienda Heights, California. This item can be shipped to United States.
  • Feature: Digital LCD timer and temperature control
  • Digital Timer Control: Digital timer control:
  • Wattage: 1100W
  • Model: 8IN1
  • MPN: HG-025S
  • Brand: zb-living
  • Power: 110V
  • Heap Platen: 15″x15″

8in1 Combo T-Shirt Heat Press Machine Clamshell DIY Printer Transfer 12X15

8in1 Combo T-Shirt Heat Press Machine Clamshell DIY Printer Transfer 12X15

8in1 Combo T-Shirt Heat Press Machine Clamshell DIY Printer Transfer 12X15

8in1 Combo T-Shirt Heat Press Machine Clamshell DIY Printer Transfer 12X15

8in1 Combo T-Shirt Heat Press Machine Clamshell DIY Printer Transfer 12X15

8in1 Combo T-Shirt Heat Press Machine Clamshell DIY Printer Transfer 12X15

8in1 Combo T-Shirt Heat Press Machine Clamshell DIY Printer Transfer 12X15

8in1 Combo T-Shirt Heat Press Machine Clamshell DIY Printer Transfer 12X15

8in1 Combo T-Shirt Heat Press Machine Clamshell DIY Printer Transfer 12X15

8in1 Combo T-Shirt Heat Press Machine Clamshell DIY Printer Transfer 12X15

8in1 Combo T-Shirt Heat Press Machine Clamshell DIY Printer Transfer 12X15

8in1 Combo T-Shirt Heat Press Machine Clamshell DIY Printer Transfer 12X15

8in1 Combo T-Shirt Heat Press Machine Clamshell DIY Printer Transfer 12X15

8 In 1 Heat Press Transfer Sublimation Machine. 8 in 1 swing-away heat press boasts all of the must-have attachments. I-tech microprocessor program ensures you get the finest graphics on your T-shirts, caps, hats, plates, mugs and so on. Besides you will not worry at all about safety problem due to our dual safety protection. You will absolutely have fun with this machine. Time Control: 0-999 seconds. Gross Weight: 58.7 lbs (26.6 kg). Package Dimensions: 21.3. 1 x Fully-assembled Heat Press Machine with Platen Press. 1 x Hat/Cap Press. 4 x Mug Press. 2 x Plate Press. 1 x Removable Silicone Pad and Cotton Pad. 1 x User Manual. S T-shirt with Heat Transfer Paper. Dual Digital LED Control – Temperature and time controller integrated on one display for easy setting and controlled by a microprocessor program for higher control accuracy. Overload Design – The overload protector helps protect the machine when the voltage is unstable or too high. The heating plate can be rotated 360-degree, which allows the heating elements to be moved safely aside, reducing the chance of accidental contact. And it provides more precision given the fact that youll be seeing the entire work surface. The sublimation machine comes with a full-range pressure-adjustment knob, allowing pressure to be more evenly distributed across the entire platen when it is closed. A little handle on the knob makes it easier to operate. The surface of the platen plate press element is non-sticky and can effectively prevent the scorching of transfers. Moreover, theres no separate silicone or Teflon sheet required for transfer. The spring press handle is equipped with yellow-colored rubber, which is designed to be antiskid. Besides, the handle is ergonomic, making operation easier and effortless. This 8 in 1 heat press printer with varieties of fittings, including one platen press (Teflon-coated), one hat/cap press, four mug presses and two plate presses, allows patterns transfer onto T-shirts, caps, mugs, plates, ceramic tiles, and other flat surfaced items. DIGITAL CONTROLLER- Temperature and time can be easily setting on single one display, featuring a overload protector. 360-DEGREE SWIVEL- Swing-away design ensures the safety during the heat press process, and enhances the convenience of picking up items. PRESSURE REGULATION- The heat press operation is achieved by pressing the pressure handle, and the pressure adjustment knob provides better control of the pressure. REFINED ELEMENT- The non-sticky, teflon-coated press elements are equipped for ensuring the safety and precision of heat transfer. WIDE APPLICATION- With multiple accessories, heat Press Machine is best for industrial, professional and home use, ideal for varieties of the flat surfaced items. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. California Warehouse: 18501 Arenth Ave, City of Industry, CA 91748. 300 W Airtex Blvd, Suite 200, Houston, TX 77090. 2125 Gateway Blvd, Hebron, KY 41048. 1000 High Street, Perth Amboy, NJ 08861. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. Caifornia Warehouse: 18501 Arenth Ave, City of Industry, CA 91748. The item “8in1 Combo T-Shirt Heat Press Machine Clamshell DIY Printer Transfer 12X15″ is in sale since Tuesday, July 30, 2019. This item is in the category “Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Heat Transfer\Presses”. The seller is “fjczg17″ and is located in Rowland Heights, California. This item can be shipped to United States, Canada, Mexico.
  • Brand: VEVOR
  • MPN: Y8LXQ0021381554342731
  • Power Input: 110V
  • Wattage: 1250W
  • Temperature Range: 32-480 (0-250)
  • Time Control: 0-999 seconds
  • Gross Weight: 58.7 lbs (26.6 kg)
  • Package Dimensions: 21.3″; x 19.3″; x 20.9″; (54x49x53 cm)
  • Platen Press (Teflon-coated): 12″;x15″; (30×38 cm)
  • Hat/Cap Press: 6″;x3″; (15×8 cm) curved
  • Mug Press #1: 2″;-2.75″; (5-7cm) diameter (6OZ)
  • Mug Press #2: 3″;-3.5″; (7.6-8.9 cm) diameter (11OZ)
  • Mug Press #3: 12OZ latte mug (Cone)
  • Mug Press #4: 17OZ latte mug (Cone)
  • Plate Press #1: 5″; (12.7 cm) max diameter
  • Plate Press #2: 6″; (15.2 cm) max diameter

8IN1 15×15 Combo T-Shirt Heat Press Transfer Mug Plate Machine Multifunctional

8IN1 15x15 Combo T-Shirt Heat Press Transfer Mug Plate Machine Multifunctional

8IN1 15x15 Combo T-Shirt Heat Press Transfer Mug Plate Machine Multifunctional

8IN1 15x15 Combo T-Shirt Heat Press Transfer Mug Plate Machine Multifunctional

8IN1 15x15 Combo T-Shirt Heat Press Transfer Mug Plate Machine Multifunctional

8IN1 15x15 Combo T-Shirt Heat Press Transfer Mug Plate Machine Multifunctional

8IN1 15x15 Combo T-Shirt Heat Press Transfer Mug Plate Machine Multifunctional

8IN1 15x15 Combo T-Shirt Heat Press Transfer Mug Plate Machine Multifunctional

8IN1 15x15 Combo T-Shirt Heat Press Transfer Mug Plate Machine Multifunctional

8IN1 15x15 Combo T-Shirt Heat Press Transfer Mug Plate Machine Multifunctional

8IN1 15x15 Combo T-Shirt Heat Press Transfer Mug Plate Machine Multifunctional

8IN1 15x15 Combo T-Shirt Heat Press Transfer Mug Plate Machine Multifunctional

8IN1 15x15 Combo T-Shirt Heat Press Transfer Mug Plate Machine Multifunctional

This 8 in 1 heat press machine can be used for T-shirts, caps, ceramic plates, ceramic tiles, mugs, coasters, mouse pads, jigsaw puzzles, lettering, other misc, fabrics & materials. It can transfer colorful pictures and characters of sublimating and dissolved printing ink onto ceramics, glasses and textiles such as cotton, flax, chemical fiber, nylon, etc. This all-in-one press includes flat platen, mugs and plates. The swing-away heat press boasts all of the must-have attachments. It has a built-in Teflon coated 15inch x 15inch (38 x 38cm) heat platen with a full range of heating coils to allow for consistency throughout its surface. The digital timer control is adjustable up to 999 seconds. The features a digital temperature gauge ranging from 0 – 250ºC (about 480ºF). Large 15″ x 15″ transfer element – The 15″ x 15″ (38 x 38cm) heat platen provides a big surface to transfer onto flat surfaced items such as T-shirts, ceramic plates, mouse pads, jigsaw puzzles etc. Digital LED controller – Preset the desired temperature and timer. Intelligent audible alarm after the transfer done. Full 360-degree rotation of swing-away design – Allows the heating element to be moved safely aside and reduce the chances of accidental contact. Full-range pressure-adjustment knob – This allows the pressure to be adjusted according to the thickness of the material you’re transferring to. Teflon-coated platen press element – The surface is non-stick, preventing scorching of transfers, and does not require a separate silicone/teflon sheet. 2 4/5inch Long arm handle- Comfortable rubber grip for everyday use and long production runs. Detachable lower platform – It is elevated with dual supports. Adjustable multi-spring balancer – Allows pressure to be more evenly distributed across the entire platen when it is closed. 4/5inch thick heating board – Built-in structural support to maintain flatness. Warm up quickly and offer even heating. Application: This heat press machine enjoys multifunctions in one machine, it can be used for transferring on t-shirt, mug, plate, cap and so on. Moreover the heating accessory can be joined. It can swing-away 180 degrees and is convenient to take off the transferred materials and can be used for transferring on certain thick materials. You can replace the heating plate easily and conveniently without using any special tools. Temperature setting: Press SET , the upper display will showing SP , and the lower of display will showing the temperature of last setting. Then enter into temperature setting option, press? Or? (increase or decrease) to set the needed temperature. After setting well, please press SET , the upper display will show SK to go on the next step for time setting Time setting: Press SET again, H1 LDE will showing ST , then enter into the time setting. Press? Or? (increase or decrease) to setting the needed time. (Normally the time is 180 seconds for mugs and 15-20 seconds for t shirt printing) Fault diagnosis and solution: 1. If the controller box showing nothing when power on, there are 2 solutions: a. Please check the fuse wire, checking the glass wire to see if the wire damaged or fusing, if damaged, please change the wire. Open up the back cover of controller box, and examine the electricity box, to see if some thread fall off or not, if fall off, please match it accordingly. When power on, if the controller display showing 3 lines, please take out the heating platen, and replaced it with another heating panel, or mug heater. If the display is normal, then maybe is the second situation of b , the thread wire were disconnect. If still showing 3 line, then is the first situation of a , the socket wire were fall out or break. Checking the inner wire of controller box, the white metal socket with 4 lines, please check if the thread is break or disconnect, if disconnect, please match it accordingly or replace it. Checking the wire of heating panel , the red cycle is showing the ends of the cable, one end is 3 thread, please replace 2 thread will be okay. When power on, the controller box showing values but cannot heating up: the display showing the actual room’s temperature, please takes out the plug of head machine, and replaced it with other mugs heater or plate heater. If temperature is heating up normally, then will be the next situation a , if cannot heat up, will be b situation. Checking the heating wire, the red cycle showing the ends of thread, please replace the white thread will ok. Open up the back cover, and examine the thread to see if some thread disconnected or break, if disconnected, please follow the above a , if nothing showing, please following b to maintenance. If no break, then replace the controller box. The head controller box heating up normally, the other parts will be not heating up, please change the heating part directly. The head machine’s function is ok, but cannot count down, then please press the third button, this machine will count down. If still cannot count down, please replace the controller box. This heat press machine enjoys multifunctions in one machine, it can be used for transferring on t-shirt, mug, plate, cap and so on. Advanced Characters: Fahrenheit and Celsius scale are selectable Adjustable multi-spring balancer Allows pressure to be more evenly distributed across the entire platen when it is closed 4/5 thick heating board Built-in structural support to maintain flatness Warm up quickly Offers even heating Upgraded aluminum alloy cradle Detached cradle for use of the mug elements Compact size and lightweight, as compared to standard mug cradles. 0 – 480ºF (0 – 250ºC). 0 – 999 Seconds. 13 1/2″ To 17″. 595 x 515 x 445mm. 15″ x 15″ (38 x 38cm). Hat / Cap Press. 6″ x 3″ (Curved). 2″-2.75″ diameter (6OZ). 3″-3.5″ diameter (11OZ). 12OZ latte mug (Cone). 17OZ latte mug (Cone). Fully-Assembled Machine With Platen Press. Removable Silicone Pad And Cotton Pad. The item “8IN1 15×15 Combo T-Shirt Heat Press Transfer Mug Plate Machine Multifunctional” is in sale since Sunday, August 25, 2019. This item is in the category “Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Heat Transfer\Presses”. The seller is “igmalootus” and is located in KL. This item can be shipped worldwide.
  • Power: 110V
  • Heap Platen: 15″x15″
  • Feature: Digital LCD timer and temperature control
  • Model: 8IN1
  • MPN: HG-025S
  • Brand: zb-living
  • Digital Timer Control: Digital timer control:
  • Wattage: 1100W

8in1 T-Shirt Mug Hat Plate Cap Heat Press Machine Digital Transfer Sublimation

8in1 T-Shirt Mug Hat Plate Cap Heat Press Machine Digital Transfer Sublimation

8in1 T-Shirt Mug Hat Plate Cap Heat Press Machine Digital Transfer Sublimation

8in1 T-Shirt Mug Hat Plate Cap Heat Press Machine Digital Transfer Sublimation

8in1 T-Shirt Mug Hat Plate Cap Heat Press Machine Digital Transfer Sublimation

8in1 T-Shirt Mug Hat Plate Cap Heat Press Machine Digital Transfer Sublimation

8in1 T-Shirt Mug Hat Plate Cap Heat Press Machine Digital Transfer Sublimation

8in1 T-Shirt Mug Hat Plate Cap Heat Press Machine Digital Transfer Sublimation

8in1 T-Shirt Mug Hat Plate Cap Heat Press Machine Digital Transfer Sublimation

8in1 T-Shirt Mug Hat Plate Cap Heat Press Machine Digital Transfer Sublimation

8in1 T-Shirt Mug Hat Plate Cap Heat Press Machine Digital Transfer Sublimation

8in1 T-Shirt Mug Hat Plate Cap Heat Press Machine Digital Transfer Sublimation

8in1 T-Shirt Mug Hat Plate Cap Heat Press Machine Digital Transfer Sublimation

Sign up to Newsletters. 8 in 1 Digital Heat Press Machine Multifunctional Transfer Sublimation for T-Shirt Mug Cup Hat Cap 15″X12″ (38X30cm) Heat Platen. This 8 in 1 heat press machine can be used for T-shirts, caps, ceramic plates, ceramic tiles, mugs, coasters, mouse pads, jigsaw puzzles, lettering, other misc. It can transfer colorful pictures and characters of sublimating and dissolved printing ink onto ceramics, glasses and textiles such as cotton, flax, chemical fiber, nylon, etc. This all-in-one press includes flat platen, mugs and plates. The swing-away heat press boasts all of the must-have attachments. It has a built-in Teflon coated 12″ x 15″ (38x30cm) heat platen with a full range of heating coils to allow for consistency throughout its surface. The digital timer control is adjustable up to 999 seconds. Initial temperature setting range: 93-254. Highest temperature setting range: 200-450. Large 12″ x 15″ transfer element. The 12″ x 15″ (38X30cm) heat platen provides a big surface to transfer onto flat surfaced items such as T-shirts, ceramic plates, mouse pads, jigsaw puzzles etc. Preset the desired temperature and timer. Intelligent audible alarm after the transfer done. Full 360-degree rotation of swing-away design – Allows the heating element to be moved safely aside and reduce the chances of accidental contact. This allows the pressure to be adjusted according to the thickness of the material you’re transferring to. Teflon-coated platen press element. The surface is non-stick, preventing scorching of transfers, and does not require a separate silicone/teflon sheet. 2 4/5 Long arm handle. Comfortable rubber grip for everyday use and long production runs. It is elevated with dual supports. Allows pressure to be more evenly distributed across the entire platen when it is closed. 4/5 thick heating board. Built-in structural support to maintain flatness. Warm up quickly and offer even heating. Upgraded aluminium alloy cradle. Detached cradle for use of the mug elements. Compact size and lightweight, as compared to standard mug cradles. Large 12″ x 15″. Digital LED temperature and time controller. Full 360-degree rotation of swing-away design. Fahrenheit and Celsius scale are selectable. Metal and plastic construction. Built-in fuse for safe using. Adjustable feet for unevenly floor. Initial Temperature Setting Range : 93-254. Highest Temperature Setting Range : 200-450. Timer control: 0 – 999 seconds. Adjustable height: 13 1/2″ to 17″. Cord length: 4.5. Dimension (w/ platen press): 15 1/4″L x 15″W x 17H. Platen Press (telfon-coated): 12″ x 15″. Hat/Cap Press: 6″x 3″ (curved). Mug Press #1: 2″-2.75″ diameter (6OZ). Mug Press #2: 3″-3.5″ diameter (11OZ). Mug Press #3: 12OZ latte mug (Cone). Mug Press #4: 17OZ latte mug (Cone). Plate Press #1: 5 max diameter. Plate Press #2: 6 max diameter. 1 X Fully-assembled machine with platen press. 1 X Hat press. 4 X Mug presses. 2 X Plate presses. 1 X Operating Manual. T-shirts, cups and hats are NOT included. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. Caifornia Warehouse: 18501 Arenth Ave, City of Indus-try, CA 91748. 300 W Airtex Blvd, Suite 200, Houston, TX 77090. 2125 Gateway Blvd, Hebron, KY 41048. 1000 High Street, Perth Amboy, NJ 08861. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. A: The item ships from Rancho Cucamonga, CA, United States. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item. The item “8in1 T-Shirt Mug Hat Plate Cap Heat Press Machine Digital Transfer Sublimation” is in sale since Thursday, April 27, 2017. This item is in the category “Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Heat Transfer\Presses”. The seller is “qiannlan-3″ and is located in Rowland Heights, California. This item can be shipped to United States, all countries in Europe, Canada, Mexico, Australia.
  • Brand: VEVOR
  • MPN: C543f007
  • Model: HP8018
  • Country/Region of Manufacture: CHINA
  • Timer control: 0 – 999 seconds
  • Adjustable height: 13.5 to 17inch
  • Wattage: 1100W
  • Cord length: 4.5inch
  • Platen Press: 12 x 15inch
  • Hat/Cap Press: 6x 3inch (curved)
  • Mug Press #1: 2-2.75inch diameter (6OZ)
  • Mug Press #2: 3-3.5inch diameter (11OZ)
  • Mug Press #3: 12OZ latte mug
  • Mug Press #4: 17OZ latte mug
  • Plate Press #1: 5inch max diameter
  • Plate Press #2: 6inch max diameter
  • Initial Temperature Setting Range: 93-254
  • Highest Temperature Setting Range: 200-450

8in1 Combo T-Shirt Heat Press Machine Clamshell DIY Printer Transfer 12X15

8in1 Combo T-Shirt Heat Press Machine Clamshell DIY Printer Transfer 12X15

8in1 Combo T-Shirt Heat Press Machine Clamshell DIY Printer Transfer 12X15

8in1 Combo T-Shirt Heat Press Machine Clamshell DIY Printer Transfer 12X15

8in1 Combo T-Shirt Heat Press Machine Clamshell DIY Printer Transfer 12X15

8in1 Combo T-Shirt Heat Press Machine Clamshell DIY Printer Transfer 12X15

8in1 Combo T-Shirt Heat Press Machine Clamshell DIY Printer Transfer 12X15

8in1 Combo T-Shirt Heat Press Machine Clamshell DIY Printer Transfer 12X15

8in1 Combo T-Shirt Heat Press Machine Clamshell DIY Printer Transfer 12X15

8in1 Combo T-Shirt Heat Press Machine Clamshell DIY Printer Transfer 12X15

8in1 Combo T-Shirt Heat Press Machine Clamshell DIY Printer Transfer 12X15

8in1 Combo T-Shirt Heat Press Machine Clamshell DIY Printer Transfer 12X15

8in1 Combo T-Shirt Heat Press Machine Clamshell DIY Printer Transfer 12X15

8 In 1 Heat Press Transfer Sublimation Machine. 8 in 1 swing-away heat press boasts all of the must-have attachments. I-tech microprocessor program ensures you get the finest graphics on your T-shirts, caps, hats, plates, mugs and so on. Besides you will not worry at all about safety problem due to our dual safety protection. You will absolutely have fun with this machine. Time Control: 0-999 seconds. Gross Weight: 58.7 lbs (26.6 kg). Package Dimensions: 21.3. 1 x Fully-assembled Heat Press Machine with Platen Press. 1 x Hat/Cap Press. 4 x Mug Press. 2 x Plate Press. 1 x Removable Silicone Pad and Cotton Pad. 1 x User Manual. S T-shirt with Heat Transfer Paper. Dual Digital LED Control – Temperature and time controller integrated on one display for easy setting and controlled by a microprocessor program for higher control accuracy. Overload Design – The overload protector helps protect the machine when the voltage is unstable or too high. The heating plate can be rotated 360-degree, which allows the heating elements to be moved safely aside, reducing the chance of accidental contact. And it provides more precision given the fact that youll be seeing the entire work surface. The sublimation machine comes with a full-range pressure-adjustment knob, allowing pressure to be more evenly distributed across the entire platen when it is closed. A little handle on the knob makes it easier to operate. The surface of the platen plate press element is non-sticky and can effectively prevent the scorching of transfers. Moreover, theres no separate silicone or Teflon sheet required for transfer. The spring press handle is equipped with yellow-colored rubber, which is designed to be antiskid. Besides, the handle is ergonomic, making operation easier and effortless. This 8 in 1 heat press printer with varieties of fittings, including one platen press (Teflon-coated), one hat/cap press, four mug presses and two plate presses, allows patterns transfer onto T-shirts, caps, mugs, plates, ceramic tiles, and other flat surfaced items. DIGITAL CONTROLLER- Temperature and time can be easily setting on single one display, featuring a overload protector. 360-DEGREE SWIVEL- Swing-away design ensures the safety during the heat press process, and enhances the convenience of picking up items. PRESSURE REGULATION- The heat press operation is achieved by pressing the pressure handle, and the pressure adjustment knob provides better control of the pressure. REFINED ELEMENT- The non-sticky, teflon-coated press elements are equipped for ensuring the safety and precision of heat transfer. WIDE APPLICATION- With multiple accessories, heat Press Machine is best for industrial, professional and home use, ideal for varieties of the flat surfaced items. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. California Warehouse: 18501 Arenth Ave, City of Industry, CA 91748. 300 W Airtex Blvd, Suite 200, Houston, TX 77090. 2125 Gateway Blvd, Hebron, KY 41048. 1000 High Street, Perth Amboy, NJ 08861. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. Caifornia Warehouse: 18501 Arenth Ave, City of Industry, CA 91748. The item “8in1 Combo T-Shirt Heat Press Machine Clamshell DIY Printer Transfer 12X15″ is in sale since Tuesday, July 30, 2019. This item is in the category “Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Heat Transfer\Presses”. The seller is “yufann8_6″ and is located in Rowland Heights, California. This item can be shipped to United States, Canada, Mexico.
  • Brand: VEVOR
  • MPN: XZGC50021331554342731
  • Power Input: 110V
  • Wattage: 1250W
  • Temperature Range: 32-480 (0-250)
  • Time Control: 0-999 seconds
  • Gross Weight: 58.7 lbs (26.6 kg)
  • Package Dimensions: 21.3″; x 19.3″; x 20.9″; (54x49x53 cm)
  • Platen Press (Teflon-coated): 12″;x15″; (30×38 cm)
  • Hat/Cap Press: 6″;x3″; (15×8 cm) curved
  • Mug Press #1: 2″;-2.75″; (5-7cm) diameter (6OZ)
  • Mug Press #2: 3″;-3.5″; (7.6-8.9 cm) diameter (11OZ)
  • Mug Press #3: 12OZ latte mug (Cone)
  • Mug Press #4: 17OZ latte mug (Cone)
  • Plate Press #1: 5″; (12.7 cm) max diameter
  • Plate Press #2: 6″; (15.2 cm) max diameter

8IN1 Combo T-Shirt Heat Press Transfer Machine Sublimation Swing Away 15×15

8IN1 Combo T-Shirt Heat Press Transfer Machine Sublimation Swing Away 15x15

8IN1 Combo T-Shirt Heat Press Transfer Machine Sublimation Swing Away 15x15

8IN1 Combo T-Shirt Heat Press Transfer Machine Sublimation Swing Away 15″x15″. The press was just used a few times, very good condition. Everything included, and still with the original packaging. The item “8IN1 Combo T-Shirt Heat Press Transfer Machine Sublimation Swing Away 15×15″ is in sale since Saturday, July 20, 2019. This item is in the category “Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Heat Transfer\Presses”. The seller is “xidon-ama” and is located in Elk Grove Village, Illinois. This item can be shipped to United States.
  • Brand: Unbranded
  • MPN: Does Not Apply
  • Press Size: 15 x 15 in

8IN1 Combo T-Shirt Heat Press Transfer Mug Plate Hat Machine Swing Away 15×15

8IN1 Combo T-Shirt Heat Press Transfer Mug Plate Hat Machine Swing Away 15x15

8IN1 Combo T-Shirt Heat Press Transfer Mug Plate Hat Machine Swing Away 15x15

8IN1 Combo T-Shirt Heat Press Transfer Mug Plate Hat Machine Swing Away 15x15

8IN1 Combo T-Shirt Heat Press Transfer Mug Plate Hat Machine Swing Away 15x15

8IN1 Combo T-Shirt Heat Press Transfer Mug Plate Hat Machine Swing Away 15x15

8IN1 Combo T-Shirt Heat Press Transfer Mug Plate Hat Machine Swing Away 15x15

8IN1 Combo T-Shirt Heat Press Transfer Mug Plate Hat Machine Swing Away 15x15

8IN1 Combo T-Shirt Heat Press Transfer Mug Plate Hat Machine Swing Away 15x15

8IN1 Combo T-Shirt Heat Press Transfer Mug Plate Hat Machine Swing Away 15x15

8IN1 Combo T-Shirt Heat Press Transfer Mug Plate Hat Machine Swing Away 15x15

8IN1 Combo T-Shirt Heat Press Transfer Mug Plate Hat Machine Swing Away 15x15

This 8 in 1 heat press machine features a swing-away design. The popular success of the machine lies in its interchangeable system of heat platens and other elements. It includes flat platen, mugs and plates. It can transfer colorful pictures and characters of sublimating and dissolved printing ink onto ceramics, glasses and textiles such as cotton, flax, chemical fiber, nylon, etc. This all-in-one press can be used for T-shirts, caps, ceramic plates, ceramic tiles, mugs, coasters, mouse pads, jigsaw puzzles, lettering, other misc. Fahrenheit and Celsius scale are selectable. Allows pressure to be more evenly distributed across the entire platen when it is closed. 4/5 thick heating board. Built-in structural support to maintain flatness. Upgraded aluminium alloy cradle. Detached cradle for use of the mug elements. Compact size and lightweight, as compared to standard mug cradles. Brand new 8 in 1 heat press machine. Large 15″ x 15″ transfer element. Provides a big surface to create your own custom T-shirt. Temperature: set the desired temperature. Timer: set the desired time. Intelligent audible alarm after the transfer done. Full 360-degree rotation of swing-away design. Allows the heating element to be moved safely aside. Can be adjusted according to the thickness of the material. Teflon-coated platen press element. Prevents scorching of transfers. 2 4/5 Long arm handle. Comfortable rubber grip for everyday use and long production runs. Removable silicone pad and cotton pad. It is elevated with dual supports. Metal and plastic construction. Built-in fuse for safe using. Adjustable feet for unevenly floor. Power input:110v – with US-standard grounded plug. Temperature range:32 – 450oF (0 – 232oC). Timer control: 0 – 999 seconds. Cord length:4.9. Adjustable height 13 1/2″ to 17″. Dimension (w/ platen press) 15 1/4″L x 15″W x 17H. Platen Press (telfon-coated)15″ x 15″(38X38cm). Hat/Cap Press 6″x 3″(curved). Mug Press #1 6oz. Mug Press #2 11oz. Mug Press #3 15OZ latte mug (Cone). Mug Press #4 17OZ latte mug (Cone). Plate Press #1 5 max diameter. Plate Press #2 6 max diameter. 1x Fully-assembled machine with platen press. T-shirts, cups and hats are NOT included. The item “8IN1 Combo T-Shirt Heat Press Transfer Mug Plate Hat Machine Swing Away 15×15″ is in sale since Saturday, June 15, 2019. This item is in the category “Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Heat Transfer\Presses”. The seller is “khairulabdh0″ and is located in Monroe Township, New Jersey. This item can be shipped to United States.
  • MPN: HG-025S
  • Model: 8IN1
  • Brand: zaralla
  • Digital Timer Control: Digital timer control:
  • Wattage: 1250W
  • Power: 110V
  • Heap Platen: 15″x15″
  • Feature: Digital LCD timer and temperature control
  • Color: Black
  • Hat/Cap Press: 6″x 3″( curved )
  • Timer control: 0 – 999 seconds

8IN1 Combo T-Shirt Heat Press Transfer Mug Plate Hat Machine Swing Away 15×15

8IN1 Combo T-Shirt Heat Press Transfer Mug Plate Hat Machine Swing Away 15x15

8IN1 Combo T-Shirt Heat Press Transfer Mug Plate Hat Machine Swing Away 15x15

8IN1 Combo T-Shirt Heat Press Transfer Mug Plate Hat Machine Swing Away 15x15

8IN1 Combo T-Shirt Heat Press Transfer Mug Plate Hat Machine Swing Away 15x15

8IN1 Combo T-Shirt Heat Press Transfer Mug Plate Hat Machine Swing Away 15x15

8IN1 Combo T-Shirt Heat Press Transfer Mug Plate Hat Machine Swing Away 15x15

8IN1 Combo T-Shirt Heat Press Transfer Mug Plate Hat Machine Swing Away 15x15

8IN1 Combo T-Shirt Heat Press Transfer Mug Plate Hat Machine Swing Away 15x15

8IN1 Combo T-Shirt Heat Press Transfer Mug Plate Hat Machine Swing Away 15x15

8IN1 Combo T-Shirt Heat Press Transfer Mug Plate Hat Machine Swing Away 15x15

8IN1 Combo T-Shirt Heat Press Transfer Mug Plate Hat Machine Swing Away 15x15

This 8 in 1 heat press machine features a swing-away design. The popular success of the machine lies in its interchangeable system of heat platens and other elements. It includes flat platen, mugs and plates. It can transfer colorful pictures and characters of sublimating and dissolved printing ink onto ceramics, glasses and textiles such as cotton, flax, chemical fiber, nylon, etc. This all-in-one press can be used for T-shirts, caps, ceramic plates, ceramic tiles, mugs, coasters, mouse pads, jigsaw puzzles, lettering, other misc. Fahrenheit and Celsius scale are selectable. Allows pressure to be more evenly distributed across the entire platen when it is closed. 4/5 thick heating board. Built-in structural support to maintain flatness. Upgraded aluminium alloy cradle. Detached cradle for use of the mug elements. Compact size and lightweight, as compared to standard mug cradles. Brand new 8 in 1 heat press machine. Large 15″ x 15″ transfer element. Provides a big surface to create your own custom T-shirt. Temperature: set the desired temperature. Timer: set the desired time. Intelligent audible alarm after the transfer done. Full 360-degree rotation of swing-away design. Allows the heating element to be moved safely aside. Can be adjusted according to the thickness of the material. Teflon-coated platen press element. Prevents scorching of transfers. 2 4/5 Long arm handle. Comfortable rubber grip for everyday use and long production runs. Removable silicone pad and cotton pad. It is elevated with dual supports. Metal and plastic construction. Built-in fuse for safe using. Adjustable feet for unevenly floor. Power input:110v – with US-standard grounded plug. Temperature range:32 – 450oF (0 – 232oC). Timer control: 0 – 999 seconds. Cord length:4.9. Adjustable height 13 1/2″ to 17″. Dimension (w/ platen press) 15 1/4″L x 15″W x 17H. Platen Press (telfon-coated)15″ x 15″(38X38cm). Hat/Cap Press 6″x 3″(curved). Mug Press #1 6oz. Mug Press #2 11oz. Mug Press #3 15OZ latte mug (Cone). Mug Press #4 17OZ latte mug (Cone). Plate Press #1 5 max diameter. Plate Press #2 6 max diameter. 1x Fully-assembled machine with platen press. T-shirts, cups and hats are NOT included. The item “8IN1 Combo T-Shirt Heat Press Transfer Mug Plate Hat Machine Swing Away 15×15″ is in sale since Saturday, June 15, 2019. This item is in the category “Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Heat Transfer\Presses”. The seller is “snddh19892015″ and is located in Monroe Township, New Jersey. This item can be shipped to United States.
  • Brand: zaralla
  • Model: 8IN1
  • MPN: HG-025S
  • Digital Timer Control: Digital timer control:
  • Wattage: 1250W
  • Power: 110V
  • Heap Platen: 15″x15″
  • Feature: Digital LCD timer and temperature control
  • Color: Black
  • Hat/Cap Press: 6″x 3″( curved )
  • Timer control: 0 – 999 seconds

8in1 Combo T-Shirt Heat Press Machine Clamshell DIY Printer Transfer 12X10

8in1 Combo T-Shirt Heat Press Machine Clamshell DIY Printer Transfer 12X10

8in1 Combo T-Shirt Heat Press Machine Clamshell DIY Printer Transfer 12X10

8in1 Combo T-Shirt Heat Press Machine Clamshell DIY Printer Transfer 12X10

8in1 Combo T-Shirt Heat Press Machine Clamshell DIY Printer Transfer 12X10

8in1 Combo T-Shirt Heat Press Machine Clamshell DIY Printer Transfer 12X10

8in1 Combo T-Shirt Heat Press Machine Clamshell DIY Printer Transfer 12X10

8in1 Combo T-Shirt Heat Press Machine Clamshell DIY Printer Transfer 12X10

8in1 Combo T-Shirt Heat Press Machine Clamshell DIY Printer Transfer 12X10

8in1 Combo T-Shirt Heat Press Machine Clamshell DIY Printer Transfer 12X10

8in1 Combo T-Shirt Heat Press Machine Clamshell DIY Printer Transfer 12X10

8in1 Combo T-Shirt Heat Press Machine Clamshell DIY Printer Transfer 12X10

8in1 Combo T-Shirt Heat Press Machine Clamshell DIY Printer Transfer 12X10

Sign up to Newsletters. 8 in 1 Digital Transfer Sublimation Heat Press Machine For T-Shirt Mug Hat 12X10. 8 in 1 heat press machine. Is involved with all must-have attachments. It can transfer colorful pictures and characters of sublimating and dissolved printing ink onto ceramics, glasses and textiles such as cotton, flax, chemical fiber, nylon, etc. This all-in-one press owns a built-in. Teflon-coated 12″x10″ (30×25 cm) heat platen. With a full range of heating coils to allow for consistency throughout its surface. The digital timer control is adjustable from. Initial temperature setting range: 93-254. Highest temperature setting range: 200-450. Swing away designed heat press offers adequate space for preparation. Anti-stick teflon-coated heat transfer board. 4/5 thick heating board. Quickly warming up and provides even heating. Non-stick surface prevents transfer scorching. Elevated with dual support, feet adjustable for uneven surface. Heat platen size: 12″x10″ (30×25 cm). Swing-away design allows heating element to be moved safely aside. Pressure can be adjusted according to the thickness of the material. 2 4/5 Long arm handle with comfortable rubber grip for long-time use. Heat press silicone pad and cotton pad removable. Feet adjustable for uneven surface. The all-in-one heat press can transfer colorful pictures and characters onto T-shirts, caps, ceramic plates, ceramic tiles, mugs, coasters, mouse pads, jigsaw puzzles, lettering, various misc. Fabrics & materials, etc. This 8 in 1 heat press set owns all must-have attachments, including 1 x full-assembled machine with teflon-coated platen press. 1 x Hat/cap press. 4 x Mug presses and 2 x Plate presses. Initial Temperature Setting Range : 93-254. Highest Temperature Setting Range : 200-450. Adjustable Height: 13 1/2″-17″ (34.3-43.2 cm). Gross Weight: 39 lb (17.7 kg). Package Dimensions (L x W x H): 20.9″ x 18.5″ x 17.3 (53 x 47 x 44 cm). Platen Press (Telfon-coated): 12″x10″ (30×25 cm). Hat/Cap Press: 6″x3″ (15×7.6 cm) (Curved). Mug Press #1: 2″-2.75″ (5.1-7 cm) Diameter (6OZ). Mug Press #2: 3″-3.5″ (7.6-8.9 cm) Diameter (11OZ). Mug Press #3: 12OZ Latte Mug (Cone). Mug Press #4: 17OZ Latte Mug (Cone). Plate Press #1: 5 (12.7 cm) Max Diameter. Plate Press #2: 6 (15.2 cm) Max Diameter. 1 X Fully-assembled Machine with Platen Press. 1 X Hat Press. 4 X Mug Presses. 2 X Plate Presses. 1 X Silicone Pad. 1 X Cotton Pad. 1 X Operation Manual. T-shirts, Cups And Hats Are NOT Included. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. Caifornia Warehouse: 18501 Arenth Ave, City of Indus-try, CA 91748. 300 W Airtex Blvd, Suite 200, Houston, TX 77090. 2125 Gateway Blvd, Hebron, KY 41048. 1000 High Street, Perth Amboy, NJ 08861. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. A: The item ships from Rancho Cucamonga, CA, United States. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item. The item “8in1 Combo T-Shirt Heat Press Machine Clamshell DIY Printer Transfer 12X10″ is in sale since Wednesday, June 26, 2019. This item is in the category “Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Heat Transfer\Presses”. The seller is “fjczg17″ and is located in Ontario, California. This item can be shipped to United States, Canada, Mexico.
  • Brand: VEVOR
  • MPN: PWFRC0031341533889135
  • Model: 12×10 inch, 8 in 1
  • Country/Region of Manufacture: China
  • Custom Bundle: No
  • Bundle Description: +Vinyl Cutter
  • Modified Item: No
  • Voltage: 110V AC
  • Power: 900W
  • Time Range: 0-999s
  • Adjustable Height: 13 1/2″;-17″; (34.3-43.2 cm)
  • Gross Weight: 39 lb (17.7 kg)
  • Package Dimensions: 20.9″; x 18.5″; x 17.3″;
  • Initial Temperature Setting Range: 93-254
  • Highest Temperature Setting Range: 200-450
  • Package Dimensions (L x W x H): 20.9″; x 18.5″; x 17.3″; (53 x 47 x 44 cm)
  • Platen Press (Telfon-coated): 12″;x10″; (30×25 cm)
  • Hat/Cap Press: 6″;x3″; (15×7.6 cm) (Curved)
  • Mug Press #1: 2″;-2.75″; (5.1-7 cm) Diameter (6OZ)
  • Mug Press #2: 3″;-3.5″; (7.6-8.9 cm) Diameter (11OZ)
  • Mug Press #3: 12OZ Latte Mug (Cone)
  • Mug Press #4: 17OZ Latte Mug (Cone)
  • Plate Press #1: 5″; (12.7 cm) Max Diameter
  • Plate Press #2: 6″; (15.2 cm) Max Diameter