5 in 1 Heat Press Machine Digital Transfer Sublimation T-Shirt Mug Hat 15×12

5 in 1 Heat Press Machine Digital Transfer Sublimation T-Shirt Mug Hat 15x12

5 in 1 Heat Press Machine Digital Transfer Sublimation T-Shirt Mug Hat 15x12

5 in 1 Heat Press Machine Digital Transfer Sublimation T-Shirt Mug Hat 15x12

5 in 1 Heat Press Machine Digital Transfer Sublimation T-Shirt Mug Hat 15x12

5 in 1 Heat Press Machine Digital Transfer Sublimation T-Shirt Mug Hat 15x12

5 in 1 Heat Press Machine Digital Transfer Sublimation T-Shirt Mug Hat 15x12

5 in 1 Heat Press Machine Digital Transfer Sublimation T-Shirt Mug Hat 15x12

5 in 1 Heat Press Machine Digital Transfer Sublimation T-Shirt Mug Hat 15x12

5 in 1 Heat Press Machine Digital Transfer Sublimation T-Shirt Mug Hat 15x12

5 in 1 Heat Press Machine Digital Transfer Sublimation T-Shirt Mug Hat 15x12

5 in 1 Heat Press Machine Digital Transfer Sublimation T-Shirt Mug Hat 15x12

5 in 1 Heat Press Machine Digital Transfer Sublimation T-Shirt Mug Hat 15x12

This 5 in 1 heat press machine can be used for T-shirts, caps, ceramic plates, ceramic tiles, mugs, coasters, mouse pads, jigsaw puzzles, lettering, other misc, fabrics & materials. It can transfer colorful pictures and characters of sublimating and dissolved printing ink onto ceramics, glasses and textiles such as cotton, flax, chemical fiber, nylon, etc. This all-in-one press includes flat platen, mugs and plates. The swing-away heat press boasts all of the must-have attachments. It has a built-in Teflon coated 15″ x 12″ (38 x 29cm) heat platen with a full range of heating coils to allow for consistency throughout its surface. The digital timer control is adjustable up to 999 seconds. The features a digital temperature gauge ranging from 0 – 250 (about 480). 5 in 1 Heat Press Machine = Heat Press Machine (29cm38cm) + 1x mug press Heater (11Oz) + 2x plate press machine(12.5cm/15cm) + 1x Cap Mat Press (8x15cm). This 5-in-1 heat press machine can transfer colorful pictures and characters (via sublimation ink/pigment ink and sublimation paper/heat transfer paper) onto ceramics, glasses and textiles such as polyester, cotton, flax, chemical fiber etc. It can be used for T-shirts, mouse mats, jigsaw puzzles, door hangers, ceramic tiles, ID badges, coasters, floor mats and just about every other in flat surface. Voltage: 110V (US Plug). Temperature range: 0-480°F / 0-250. Time control range: 0-999 Sec. Temperature error band: +/-5 degrees. Heater size for t shirt: 2938cm. Heater size for mug: 11oz cone. Heater size for plate: 12.5cm & 15cm. Heater size for cap: 815cm. Large 12 “x 15″ (29cm38cm) transfer element. Digital LED temperature and time controller. Full 360-degree rotation of swing-away design. Intelligent audible alarm after the transfer done. Fahrenheit and Celsius thermometer selectable. Pressure adjustment over the entire bandwidth. Teflon-coated pot-pressing member. 2 4/5 Langarmgriff. Removable bottom platform. Adjustable multi-spring balancer. 4/5 thick hot plate. Cradle with improved aluminum alloy. Metal and plastic construction. Built-in fuse for safe use. Adjustable feet for unevenly floor. Allows the heating element to be moved safely aside. Full-range pressure-adjustment knob. Can be adjusted according to the thickness of the material. Prevents scorching of transfers. Awfully simple operation. Draw down the handle and wait until it alerts 2 4/5 Long arm handle. Comfortable rubber grip for everyday use and long production runs. Removable silicone pad and cotton pad. Detachable lower platform. It is elevated with dual supports. 1 x fully Assembled Machine with platen press. 1 x Cap presses. 2 x Plate presses. 1 x Removable silicone pad and cotton pad. 1 x US Plug. 1 x Manual. T-shirts, cups and hats are NOT included. We have warehouses in the USA. Please contact our customer service team immediately if. You changed your mind and wish to request a return. Your product was damaged during transit. Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We will require a picture of the damaged part for verification. E-mails are answered Monday through Saturday. Please allow up to 48 hours for a response to your message. The item “5 in 1 Heat Press Machine Digital Transfer Sublimation T-Shirt Mug Hat 15×12″ is in sale since Saturday, October 10, 2020. This item is in the category “Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Heat Transfer\Presses”. The seller is “a1331-4″ and is located in Flanders, New Jersey. This item can be shipped to United States.
  • Heater size for t shirt: 12x15inch
  • Model: XY-008-5in1
  • Time control range: 0-999 Sec
  • EAN: Does Not Apply
  • Type: 5 in 1 Multifunctional
  • Power: 1000W
  • Bundle Description: Yes
  • Material: Metal
  • Automation Type: Semi-Auto
  • Temperature range: 0-399
  • Heater size for plate: 12.5cm & 15cm
  • Features: Digital Display
  • Application Type: T-shirts/Garments/Hat/Cap/Plate
  • Custom Bundle: Yes
  • Timer control: 0 – 999 seconds
  • Voltage: 110 V
  • Heater size for cap: 8*15cm
  • Heater size for mug: 11oz cone
  • Press Style: Swing-arm
  • MPN: Does Not Apply
  • Press Size: 12 x 15 in
  • UPC: Does Not Apply
  • Temperature error band: +/-5 degrees
  • Brand: VEVOR

8 in 1 Heat Press Machine For T-Shirts 15×12 Combo Kit Sublimation Swing away

8 in 1 Heat Press Machine For T-Shirts 15x12 Combo Kit Sublimation Swing away

8 in 1 Heat Press Machine For T-Shirts 15x12 Combo Kit Sublimation Swing away

8 in 1 Heat Press Machine For T-Shirts 15x12 Combo Kit Sublimation Swing away

8 in 1 Heat Press Machine For T-Shirts 15x12 Combo Kit Sublimation Swing away

8 in 1 Heat Press Machine For T-Shirts 15x12 Combo Kit Sublimation Swing away

8 in 1 Heat Press Machine For T-Shirts 15x12 Combo Kit Sublimation Swing away

8 in 1 Heat Press Machine For T-Shirts 15x12 Combo Kit Sublimation Swing away

8 in 1 Heat Press Machine For T-Shirts 15x12 Combo Kit Sublimation Swing away

8 in 1 Heat Press Machine For T-Shirts 15x12 Combo Kit Sublimation Swing away

8 in 1 Heat Press Machine For T-Shirts 15x12 Combo Kit Sublimation Swing away

8 in 1 Heat Press Machine For T-Shirts 15x12 Combo Kit Sublimation Swing away

8 in 1 Heat Press Machine For T-Shirts 15x12 Combo Kit Sublimation Swing away

Better price, Top Quality, expert Service support. Live demo of multiple products. Owned and operated company. This 8 in 1 heat press machine can be used for T-shirts, caps, ceramic plates, ceramic tiles, mugs, coasters, mouse pads, jigsaw puzzles, lettering, other misc. It can transfer colorful pictures and characters of sublimating and dissolved printing ink onto ceramics, glasses and textiles such as cotton, flax, chemical fiber, nylon, etc. This all-in-one press includes flat platen, mugs and plates. The swing-away heat press boasts all of the must-have attachments. It has a built-in Teflon coated 12″ x 15″ (38X30cm) heat platen with a full range of heating coils to allow for consistency throughout its surface. The digital timer control is adjustable up to 999 seconds. The features a digital temperature gauge ranging from 0 – 250ºC (about 430ºF). Large 12″ x 15″ transfer element – The 12″ x 15″ (38X30cm) heat platen provides a big surface to transfer onto flat surfaced items such as T-shirts, ceramic plates, mouse pads, jigsaw puzzles etc. Digital LED controller – Preset the desired temperature and timer. Intelligent audible alarm after the transfer done. Full 360-degree rotation of swing-away design – Allows the heating element to be moved safely aside and reduce the chances of accidental contact. Full-range pressure-adjustment knob – This allows the pressure to be adjusted according to the thickness of the material you are transferring to. Teflon-coated platen press element – The surface is non-stick, preventing scorching of transfers, and does not require a separate silicone/teflon sheet. 2 4/5 Long arm handle – Comfortable rubber grip for everyday use and long production runs. Detachable lower platform – It is elevated with dual supports. Adjustable multi-spring balancer – Allows pressure to be more evenly distributed across the entire platen when it is closed. 4/5 thick heating board – Built-in structural support to maintain flatness. Warm up quickly and offer even heating. Upgraded aluminium alloy cradle – Detached cradle for use of the mug elements. Compact size and lightweight, as compared to standard mug cradles. This heat press machine enjoys multifunctions in one machine, it can be used for transferring on t-shirt, mug, plate, cap and so on. Moreover the heating accessory can be joined. It can swing-away 180 degrees and is convenient to take off the transferred materials and can be used for transferring on certain thick materials. You can replace the heating plate easily and conveniently without using any special tools. Press “SET”, the upper display will showing “SP”, and the lower of display will showing the temperature of last setting. Then enter into temperature setting option, press? (increase or decrease) to set the needed temperature. After setting well, please press “SET”, the upper display will show “SK” to go on the next step for time setting. Press “SET” again, H1 LDE will showing “ST”, then enter into the time setting. (increase or decrease) to setting the needed time. (Normally the time is 180 seconds for mugs and 15-20 seconds for t shirt printing). Fault diagnosis and solution. If the controller box showing nothing when power on, there are 2 solutions. Please check the fuse wire, checking the glass wire to see if the wire damaged or fusing, if damaged, please change the wire. Open up the back cover of controller box, and examine the electricity box, to see if some thread fall off or not, if fall off, please match it accordingly. When power on, if the controller display showing 3 lines, please take out the heating platen, and replaced it with another heating panel, or mug heater. If the display is normal, then maybe is the second situation of “b”, the thread wire were disconnect. If still showing 3 line, then is the first situation of “a”, the socket wire were fall out or break. Checking the inner wire of controller box, the white metal socket with 4 lines, please check if the thread is break or disconnect, if disconnect, please match it accordingly or replace it. Checking the wire of heating panel , the red cycle is showing the ends of the cable, one end is 3 thread, please replace 2 thread will be okay. When power on, the controller box showing values but cannot heating up: the display showing the actual room’s temperature, please takes out the plug of head machine, and replaced it with other mugs heater or plate heater. If temperature is heating up normally, then will be the next situation “a”, if cannot heat up, will be “b”situation. Checking the heating wire, the red cycle showing the ends of thread, please replace the white thread will ok. Open up the back cover, and examine the thread to see if some thread disconnected or break, if disconnected, please follow the above “a”, if nothing showing, please following “b” to maintenance. If no break, then replace the controller box. The head controller box heating up normally, the other parts will be not heating up, please change the heating part directly. The head machine’s function is ok, but cannot count down, then please press the third button, this machine will count down. If still cannot count down, please replace the controller box. Fahrenheit and Celsius scale are selectable. Allows pressure to be more evenly distributed across the entire platen when it is closed. 4/5 thick heating board. Built-in structural support to maintain flatness. Upgraded aluminium alloy cradle. Detached cradle for use of the mug elements. Model : Heat Press Machine. Dimension : 15 1/4″L x 15″W x 17H. Platen Press : 12″ x 15″(38X30cm). Hat/Cap Press : 6″x 3″(curved). Mug Press #1 : 2″-2.75″ diameter (6OZ). Mug Press #2 : 3″-3.5″ diameter (11OZ). Mug Press #3 : 12OZ latte mug (Cone). Mug Press #4 : 17OZ latte mug (Cone). Plate Press #1 : 5 max diameter. Plate Press #2 : 6 max diameter. Temperature range : 0 – 480F (0 – 250C). Cord length : 4.5. Adjustable height : 13 1/2″ to 17″. Large 12″ x 15″ (38X30cm) transfer element. Digital LED temperature and time controller. Full 360-degree rotation of swing-away design. Teflon-coated platen press element. 2 4/5 Long arm handle. Metal and plastic construction. Built-in fuse for safe using. Adjustable feet for unevenly floor. Combo type, it could transfer images to T-shirt, mug, plate, cap and so on. Digital control ensures the high precision and sensitivity. The changing among the spare parts is available when necessary. High precise automatic digital tempreture indicator. Heating coil and heating panel are integrated, safe and durable. Issues with certain thickness can also be transferred. Adopting advanced technology and good material for better effect. Swing-away design and more even pressure guarantees your perfect printing. 2pcs Teflon sheets, 1pc T-shirts, and hat are included. Fully-assembled machine with platen press X 1. Hat press X 1. Mug presses X 4. Plate presses X 2. Removable silicone pad and cotton pad X 1. Teflon Sheet X 2. Operating Manual X 1. Free T-shirt X 1. Free Hat X 1. All items are dispatched from our warehouse in CANJAL. We seeks to sell the greatest value products on the market. These items should be of an acceptable quality, fit for purpose, and matching their description. We have a highly experienced engineering and technical team who specialise in researching and developing all our products. We benchmark our products against high standards and that’s why our customers keep coming back. We never want our customers to wait for parts, we have plenty of parts available for every product. Please contact our customer service team immediately if. You changed your mind and wish to request a return. Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We will require a picture of the damaged part for verification. The item “8 in 1 Heat Press Machine For T-Shirts 15×12 Combo Kit Sublimation Swing away” is in sale since Monday, February 1, 2021. This item is in the category “Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Heat Transfer\Presses”. The seller is “best-homepro” and is located in CA & NY. This item can be shipped to United States.
  • Model: Heat Press Machine
  • MPN: 8HOHP 1SS
  • Dimension: 15 1/4″L x 15″W x 17″H
  • Platen Press: 12″ x 15″(38X30cm)
  • Hat/Cap Press: 6″x 3″(curved)
  • Temperature range: 0 – 480F (0 – 250C)
  • Wattage: 1250W
  • Power input: 110V
  • Cord length: 4.5
  • Adjustable height: 13 1/2″ to 17″
  • Type: 8 in 1 Multifunctional
  • Application Type: T-shirts/Garments/Hat/Cap/Plate
  • Press Size: 15″X12″
  • Automation Type: Semi-Auto
  • Features: Auto-Open
  • Material: Metal
  • Press Style: 360 Swing-arm
  • Mug Press #1: 2″-2.75″ diameter (6OZ)
  • Mug Press #2: 3″-3.5″ diameter (11OZ)
  • Mug Press #3: 12OZ latte mug (Cone)
  • Mug Press #4: 17OZ latte mug (Cone)
  • Plate Press #1: 5″ max diameter
  • Plate Press #2: 6″ max diameter
  • Warranty: 8 Years
  • Teflon Sheet: 2PC
  • T-Shirt: 1PC
  • Hat: 1PC
  • Weight: 20kg (44 lb)
  • Voltage: 110V
  • Brand: Carejoy

VIPSHOP 8 in 1 Heat Press Transfer Machine Sublimation 15×12 T-Shirt DIY PRINT

VIPSHOP 8 in 1 Heat Press Transfer Machine Sublimation 15x12 T-Shirt DIY PRINT

VIPSHOP 8 in 1 Heat Press Transfer Machine Sublimation 15x12 T-Shirt DIY PRINT

VIPSHOP 8 in 1 Heat Press Transfer Machine Sublimation 15x12 T-Shirt DIY PRINT

VIPSHOP 8 in 1 Heat Press Transfer Machine Sublimation 15x12 T-Shirt DIY PRINT

VIPSHOP 8 in 1 Heat Press Transfer Machine Sublimation 15x12 T-Shirt DIY PRINT

VIPSHOP 8 in 1 Heat Press Transfer Machine Sublimation 15x12 T-Shirt DIY PRINT

VIPSHOP 8 in 1 Heat Press Transfer Machine Sublimation 15x12 T-Shirt DIY PRINT

VIPSHOP 8 in 1 Heat Press Transfer Machine Sublimation 15x12 T-Shirt DIY PRINT

VIPSHOP 8 in 1 Heat Press Transfer Machine Sublimation 15x12 T-Shirt DIY PRINT

VIPSHOP 8 in 1 Heat Press Transfer Machine Sublimation 15x12 T-Shirt DIY PRINT

VIPSHOP 8 in 1 Heat Press Transfer Machine Sublimation 15x12 T-Shirt DIY PRINT

VIPSHOP 8 in 1 Heat Press Transfer Machine Sublimation 15x12 T-Shirt DIY PRINT

This 8 in 1 heat press machine can be used for T-shirts, caps, ceramic plates, ceramic tiles, mugs, coasters, mouse pads, jigsaw puzzles, lettering, other misc. It can transfer colorful pictures and characters of sublimating and dissolved printing ink onto ceramics, glasses and textiles such as cotton, flax, chemical fiber, nylon, etc. This all-in-one press includes flat platen, mugs and plates. The swing-away heat press boasts all of the must-have attachments. It has a built-in Teflon coated 12″ x 15″ (38X30cm) heat platen with a full range of heating coils to allow for consistency throughout its surface. The digital timer control is adjustable up to 999 seconds. The features a digital temperature gauge ranging from 0 – 250ºC (about 430ºF). Large 12″ x 15″ transfer element – The 12″ x 15″ (38X30cm) heat platen provides a big surface to transfer onto flat surfaced items such as T-shirts, ceramic plates, mouse pads, jigsaw puzzles etc. Digital LED controller – Preset the desired temperature and timer. Intelligent audible alarm after the transfer done. Full 360-degree rotation of swing-away design – Allows the heating element to be moved safely aside and reduce the chances of accidental contact. Full-range pressure-adjustment knob – This allows the pressure to be adjusted according to the thickness of the material you are transferring to. Teflon-coated platen press element – The surface is non-stick, preventing scorching of transfers, and does not require a separate silicone/teflon sheet. 2 4/5 Long arm handle – Comfortable rubber grip for everyday use and long production runs. Detachable lower platform – It is elevated with dual supports. Adjustable multi-spring balancer – Allows pressure to be more evenly distributed across the entire platen when it is closed. 4/5 thick heating board – Built-in structural support to maintain flatness. Warm up quickly and offer even heating. Upgraded aluminium alloy cradle – Detached cradle for use of the mug elements. Compact size and lightweight, as compared to standard mug cradles. This heat press machine enjoys multifunctions in one machine, it can be used for transferring on t-shirt, mug, plate, cap and so on. Moreover the heating accessory can be joined. It can swing-away 180 degrees and is convenient to take off the transferred materials and can be used for transferring on certain thick materials. You can replace the heating plate easily and conveniently without using any special tools. Model : Heat Press Machine. Dimension : 15 1/4″L x 15″W x 17H. Platen Press : 12″ x 15″(38X30cm). Hat/Cap Press : 6″x 3″(curved). Mug Press #1 : 2″-2.75″ diameter (6OZ). Mug Press #2 : 3″-3.5″ diameter (11OZ). Mug Press #3 : 12OZ latte mug (Cone). Mug Press #4 : 17OZ latte mug (Cone). Plate Press #1 : 5 max diameter. Plate Press #2 : 6 max diameter. Temperature range : 0 – 480F (0 – 250C). Cord length : 4.5. Adjustable height : 13 1/2″ to 17″. 1 x Fully-assembled machine with platen press. 1 x Hat press. 4 x Mug presses. 2 x Plate presses. 1 x Removable silicone pad and cotton pad. 2 x Teflon Sheet. 1 x Operating Manual. 1 x Free T-shirt. 1 x Free Hat. Large 12″ x 15″ (38X30cm) transfer element. Digital LED temperature and time controller. Full 360-degree rotation of swing-away design. Fahrenheit and Celsius scale are selectable. Teflon-coated platen press element. 2 4/5 Long arm handle. 4/5 thick heating board. Upgraded aluminium alloy cradle. Metal and plastic construction. Built-in fuse for safe using. Adjustable feet for unevenly floor. Combo type, it could transfer images to T-shirt, mug, plate, cap and so on. Digital control ensures the high precision and sensitivity. The changing among the spare parts is available when necessary. High precise automatic digital tempreture indicator. Heating coil and heating panel are integrated, safe and durable. Issues with certain thickness can also be transferred. Adopting advanced technology and good material for better effect. Swing-away design and more even pressure guarantees your perfect printing. T-shirts, cups and hats are NOT included. Please contact our customer service team immediately if. You changed your mind and wish to request a return. Your product was damaged during transit. Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We will require a picture of the damaged part for verification. We seeks to sell the greatest value products on the market. These items should be of an acceptable quality, fit for purpose, and matching their description. We have a highly experienced engineering and technical team who specialise in researching and developing all our products. We benchmark our products against high standards and that¡¯s why our customers keep coming back. The item “VIPSHOP 8 in 1 Heat Press Transfer Machine Sublimation 15×12 T-Shirt DIY PRINT” is in sale since Friday, January 29, 2021. This item is in the category “Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Heat Transfer\Presses”. The seller is “vipshopmarket” and is located in Westbury, New York. This item can be shipped to United States.
  • Model: Heat Press Machine
  • MPN: 8HOHP 1SS
  • Dimension: 15 1/4″L x 15″W x 17″H
  • Platen Press: 12″ x 15″(38X30cm)
  • Hat/Cap Press: 6″x 3″(curved)
  • Temperature range: 0 – 480F (0 – 250C)
  • Wattage: 1250W
  • Power input: 110V
  • Cord length: 4.5
  • Adjustable height: 13 1/2″ to 17″
  • Type: 8 in 1 Multifunctional
  • Application Type: T-shirts/Garments/Hat/Cap/Plate
  • Press Size: 15″X12″
  • Automation Type: Semi-Auto
  • Features: Auto-Open
  • Material: Metal
  • Press Style: 360 Swing-arm
  • Mug Press #1: 2″-2.75″ diameter (6OZ)
  • Mug Press #2: 3″-3.5″ diameter (11OZ)
  • Mug Press #3: 12OZ latte mug (Cone)
  • Mug Press #4: 17OZ latte mug (Cone)
  • Plate Press #1: 5″ max diameter
  • Plate Press #2: 6″ max diameter
  • Warranty: 5 Years
  • Teflon Sheet: 2PC
  • T-Shirt: 1PC
  • Hat: 1PC
  • Weight: 20kg (44 lb)
  • Brand: Carejoy

New 5 in 1 Digital 15X12 Heat Press Machine Transfer Sublimation T-Shirt DIY

New 5 in 1 Digital 15X12 Heat Press Machine Transfer Sublimation T-Shirt DIY

New 5 in 1 Digital 15X12 Heat Press Machine Transfer Sublimation T-Shirt DIY

New 5 in 1 Digital 15X12 Heat Press Machine Transfer Sublimation T-Shirt DIY

New 5 in 1 Digital 15X12 Heat Press Machine Transfer Sublimation T-Shirt DIY

New 5 in 1 Digital 15X12 Heat Press Machine Transfer Sublimation T-Shirt DIY

New 5 in 1 Digital 15X12 Heat Press Machine Transfer Sublimation T-Shirt DIY

New 5 in 1 Digital 15X12 Heat Press Machine Transfer Sublimation T-Shirt DIY

New 5 in 1 Digital 15X12 Heat Press Machine Transfer Sublimation T-Shirt DIY

New 5 in 1 Digital 15X12 Heat Press Machine Transfer Sublimation T-Shirt DIY

New 5 in 1 Digital 15X12 Heat Press Machine Transfer Sublimation T-Shirt DIY

New 5 in 1 Digital 15X12 Heat Press Machine Transfer Sublimation T-Shirt DIY

New 5 in 1 Digital 15X12 Heat Press Machine Transfer Sublimation T-Shirt DIY

This swing-away heat press boasts all of the must-have attachments. This includes flat platen, mugs and plates. It can transfer colorful pictures and characters of sublimating and dissolved printing ink onto ceramics, glasses and textiles such as cotton, flax, chemical fiber, nylon, etc. This all-in-one press can be used for T-shirts, caps, ceramic plates, ceramic tiles, mugs, coasters, mouse pads, jigsaw puzzles, lettering, other misc. The swing-away heat press boasts all of the must-have attachments. It has a built-in Teflon coated 15in x 12in (38 x 29cm) heat platen with a full range of heating coils to allow for consistency throughout its surface. The digital timer control is adjustable up to 999 seconds. The features a digital temperature gauge ranging from 0 – 250ºC (about 480ºF). Fahrenheit and Celsius scale are selectable. Allows pressure to be more evenly distributed across the entire platen when it is closed. 4/5 thick heating board. Built-in structural support to maintain flatness. Upgraded aluminium alloy cradle. Detached cradle for use of the mug elements. Compact size and lightweight, as compared to standard mug cradles. Power input : 110v – with US-standard grounded plug. Dimension (w/ platen press) : 15 1/4″L x 15″W x 17H. Platen Press (telfon-coated) : 15″ x 12″. Temperature range : 32 – 430 Fahrenheit degree (0 – 250 Centigrade). Hat/Cap Press : 6″x 3″(curved). Mug Press : 3″-3.5″ diameter (11oz). Timer control : 0 – 999 seconds. Plate Press #1 : 5 max diameter. Cord length : 4.5. Plate Press #2 : 6 max diameter. Adjustable height : 13 1/2″ to 17″. 1 x Fully-assembled machine with platen press. 1 x Silicone pad. 1 x Hat press. 1 x Cotton pad. 1 x Mug press. 1 x Plate presses. 2 x Teflon Sheet. Brand new 5 in 1 heat press machine. Large 15″ x 12″ transfer element. Provides a big surface to create your own custom T-shirt. Temperature: set the desired temperature. Timer: set the desired time. Intelligent audible alarm after the transfer done. Full 360-degree rotation of swing-away design. Allows the heating element to be moved safely aside by both synchronization and non-synchronization. Can be adjusted according to the thickness of the material. Teflon-coated platen press element. Prevents scorching of transfers. Draw down the handle and wait until it alerts. 2 4/5 Long arm handle. Comfortable rubber grip for everyday use and long production runs. Removable silicone pad and cotton pad. It is elevated with dual supports. Metal and plastic construction. Built-in fuse for safe using. Adjustable feet for unevenly floor. Please contact our customer service team immediately if. You changed your mind and wish to request a return. Your product was damaged during transit. Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We will require a picture of the damaged part for verification. We seeks to sell the greatest value products on the market. These items should be of an acceptable quality, fit for purpose, and matching their description. We have a highly experienced engineering and technical team who specialise in researching and developing all our products. We benchmark our products against high standards and that¡¯s why our customers keep coming back. The item “New 5 in 1 Digital 15X12 Heat Press Machine Transfer Sublimation T-Shirt DIY” is in sale since Monday, March 8, 2021. This item is in the category “Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Heat Transfer\Presses”. The seller is “vipshopmarket” and is located in Hacienda Heights, California. This item can be shipped to United States.
  • Model: 5IN1
  • Supply Type: Heat Press
  • Custom Bundle: No
  • Press Style: Swing-arm
  • Press Size: 12 x 15 in
  • Material: Metal
  • Application Type: T-shirts/Garments/Hat/Cap/Plate
  • Type: 5 in 1 Multifunctional
  • Features: Auto-Open
  • Wattage: 1200W
  • Hat/Cap Press: 6″x 3″( curved )
  • MPN: HP5IN1H
  • Mug Press: 3″-3.5″ diameter ( 11oz )
  • Plate Press #1: 5″ max diameter
  • Plate Press #2: 6″ max diameter
  • Timer control: 0 – 999 seconds
  • Temperature range: 32 – 480 Fahrenheit degree (0 – 250 Centigrade)
  • Platen Press (telfon-coated): 15″ x 12″
  • Color: Black
  • Adjustable height: 13 1/2″ to 17″
  • Warranty: 9 Years
  • Teflon Sheet: 2PCS
  • Automation Type: Semi-auto
  • Brand: VIPSHOPMARKET
  • T-Shirt: 1PC
  • Hat: 1PC
  • Package Size: 17.5″x18″x17″
  • Weight: 41lbs
  • Voltage: 110 V

FTPRESS 8 in 1 Heat Press Machine 15×12 Swing Away Transfer T-Shirt Mug Hat

FTPRESS 8 in 1 Heat Press Machine 15x12 Swing Away Transfer T-Shirt Mug Hat

FTPRESS 8 in 1 Heat Press Machine 15x12 Swing Away Transfer T-Shirt Mug Hat

FTPRESS 8 in 1 Heat Press Machine 15x12 Swing Away Transfer T-Shirt Mug Hat

FTPRESS 8 in 1 Heat Press Machine 15x12 Swing Away Transfer T-Shirt Mug Hat

FTPRESS 8 in 1 Heat Press Machine 15x12 Swing Away Transfer T-Shirt Mug Hat

FTPRESS 8 in 1 Heat Press Machine 15x12 Swing Away Transfer T-Shirt Mug Hat

FTPRESS 8 in 1 Heat Press Machine 15x12 Swing Away Transfer T-Shirt Mug Hat

FTPRESS 8 in 1 Heat Press Machine 15x12 Swing Away Transfer T-Shirt Mug Hat

FTPRESS 8 in 1 Heat Press Machine 15x12 Swing Away Transfer T-Shirt Mug Hat

FTPRESS 8 in 1 Heat Press Machine 15x12 Swing Away Transfer T-Shirt Mug Hat

FTPRESS 8 in 1 Heat Press Machine 15x12 Swing Away Transfer T-Shirt Mug Hat

FTPRESS 8 in 1 Heat Press Machine 15x12 Swing Away Transfer T-Shirt Mug Hat

For more information on our products. Please send message to us. 8 in 1 Heat Press Machine Digital Transfer Sublimation T-Shirt Mug Hat Plate Cap. What Customers Have To About Us. ” Delivered as promised and item is as described “. Just what i was looking for. Had a problem-was able to successfully resolve it. This 8 in 1 heat press machine can be used for T-shirts, caps, ceramic plates, ceramic tiles, mugs, coasters, mouse pads, jigsaw puzzles, lettering, other misc. It can transfer colorful pictures and characters of sublimating and dissolved printing ink onto ceramics, glasses and textiles such as cotton, flax, chemical fiber, nylon, etc. This all-in-one press includes flat platen, mugs and plates. The swing-away heat press boasts all of the must-have attachments. It has a built-in Teflon coated 12″ x 15″ (38X30cm) heat platen with a full range of heating coils to allow for consistency throughout its surface. The digital timer control is adjustable up to 999 seconds. The features a digital temperature gauge ranging from 0 – 250ºC (about 430ºF). Large 15″ x 12″ transfer element – The 15″ x 12″ (38 x 29cm) heat platen provides a big surface to transfer onto flat surfaced items such as T-shirts, ceramic plates, mouse pads, jigsaw puzzles etc. Digital LED controller – Preset the desired temperature and timer. Intelligent audible alarm after the transfer done. Full 360-degree rotation of swing-away design – Allows the heating element to be moved safely aside and reduce the chances of accidental contact. Full-range pressure-adjustment knob – This allows the pressure to be adjusted according to the thickness of the material you’re transferring to. Teflon-coated platen press element – The surface is non-stick, preventing scorching of transfers, and does not require a separate silicone/teflon sheet. 2 4/5 Long arm handle- Comfortable rubber grip for everyday use and long production runs. Detachable lower platform – It is elevated with dual supports. Adjustable multi-spring balancer – Allows pressure to be more evenly distributed across the entire platen when it is closed. 4/5 thick heating board – Built-in structural support to maintain flatness. Warm up quickly and offer even heating. Upgraded aluminium alloy cradle – Detached cradle for use of the mug elements. Compact size and lightweight, as compared to standard mug cradles. Press “SET”, the upper display will showing “SP”, and the lower of display will showing the temperature of last setting. Then enter into temperature setting option, press? (increase or decrease) to set the needed temperature. After setting well, please press “SET”, the upper display will show “SK” to go on the next step for time setting. Time setting: Press “SET” again, H1 LDE will showing “ST”, then enter into the time setting. (increase or decrease) to setting the needed time. (Normally the time is 180 seconds for mugs and 15-20 seconds for t shirt printing). Fault diagnosis and solution. If the controller box showing nothing when power on, there are 2 solutions. Please check the fuse wire, checking the glass wire to see if the wire damaged or fusing, if damaged, please change the wire. Open up the back cover of controller box, and examine the electricity box, to see if some thread fall off or not, if fall off, please match it accordingly. When power on, if the controller display showing 3 lines, please take out the heating platen, and replaced it with another heating panel, or mug heater. If the display is normal, then maybe is the second situation of “b”, the thread wire were disconnect. If still showing 3 line, then is the first situation of “a”, the socket wire were fall out or break. Checking the inner wire of controller box, the white metal socket with 4 lines, please check if the thread is break or disconnect, if disconnect, please match it accordingly or replace it. Checking the wire of heating panel , the red cycle is showing the ends of the cable, one end is 3 thread, please replace 2 thread will be okay. When power on, the controller box showing values but cannot heating up: the display showing the actual room’s temperature, please takes out the plug of head machine, and replaced it with other mugs heater or plate heater. If temperature is heating up normally, then will be the next situation “a”, if cannot heat up, will be “b”situation. Checking the heating wire, the red cycle showing the ends of thread, please replace the white thread will ok. Open up the back cover, and examine the thread to see if some thread disconnected or break, if disconnected, please follow the above “a”, if nothing showing, please following “b” to maintenance. If no break, then replace the controller box. The head controller box heating up normally, the other parts will be not heating up, please change the heating part directly. The head machine’s function is ok, but cannot count down, then please press the third button, this machine will count down. If still cannot count down, please replace the controller box. This heat press machine enjoys multifunctions in one machine, it can be used for transferring on t-shirt, mug, plate, cap and so on. Moreover the heating accessory can be joined. You can replace the heating plate easily and conveniently without using any special tools. Fahrenheit and Celsius scale are selectable. Allows pressure to be more evenly distributed across the entire platen when it is closed. 4/5 thick heating board. Built-in structural support to maintain flatness. Upgraded aluminium alloy cradle. Detached cradle for use of the mug elements. 15 1/4″L x 15″W x 17H. 12″ x 15″(38X30cm). 6″x 3″(curved). 2″-2.75″ diameter (6OZ). 3″-3.5″ diameter (11OZ). 12OZ latte mug (Cone). 17OZ latte mug (Cone). 0 – 480F (0 – 250C). 13 1/2″ to 17″. Fully-assembled machine with platen press. Removable silicone pad and cotton pad. Large 12″ x 15″ (38X30cm) transfer element. Digital LED temperature and time controller. Full 360-degree rotation of swing-away design. Teflon-coated platen press element. 2 4/5 Long arm handle. Metal and plastic construction. Built-in fuse for safe using. Adjustable feet for unevenly floor. Combo type, it could transfer images to T-shirt, mug, plate, cap and so on. Digital control ensures the high precision and sensitivity. The changing among the spare parts is available when necessary. High precise automatic digital tempreture indicator. Heating coil and heating panel are integrated, safe and durable. Issues with certain thickness can also be transferred. Adopting advanced technology and good material for better effect. Swing-away design and more even pressure guarantees your perfect printing. T-shirts, cups and hats are NOT included. All items are dispatched from our warehouse in Azusa, CA. Please contact our customer service team immediately if. You changed your mind and wish to request a return. Your product was damaged during transit. Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We will require a picture of the damaged part for verification. We seeks to sell the greatest value products on the market. These items should be of an acceptable quality, fit for purpose, and matching their description. We have a highly experienced engineering and technical team who specialise in researching and developing all our products. We benchmark our products against high standards and that’s why our customers keep coming back. 25 years Industry Experience. The item “FTPRESS 8 in 1 Heat Press Machine 15×12 Swing Away Transfer T-Shirt Mug Hat” is in sale since Friday, January 29, 2021. This item is in the category “Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Heat Transfer\Presses”. The seller is “ftpress” and is located in Westbury, New York. This item can be shipped to United States.
  • Brand: FTPRESS
  • Model: Heat Press Machine
  • MPN: 8EW-97
  • Dimension: 15 1/4inL x 15inW x 17inH
  • Platen Press: 12in x 15in(38X30cm)
  • Hat/Cap Press: 6inx 3in(curved)
  • Temperature range: 0 – 480F (0 – 250C)
  • Wattage: 1250W
  • Cord length: 4.5
  • Adjustable height: 13 1/2in to 17in
  • Mug Press #1: 2″-2.75″ diameter (6OZ)
  • Mug Press #2: 3″-3.5″ diameter (11OZ)
  • Mug Press #3: 12OZ latte mug (Cone)
  • Mug Press #4: 17OZ latte mug (Cone)
  • Plate Press #1: 5″ max diameter
  • Plate Press #2: 6″ max diameter
  • Power cord: Included
  • Material: Metal
  • Teflon Sheet: 2PCS
  • T-Shirt: 1PC
  • Hat: 1PC
  • Press Style: Swing-arm
  • Press Size: 12 x 15 in
  • Voltage: 110 V
  • Type: 8 in 1 Multifunctional
  • Application Type: T-shirts/Garments/Hat/Cap/Plate
  • Features: Digital Display

15×12 5in1 Heat Press Machine Digital Transfer Sublimation T-Shirt Mug Hat USA

15x12 5in1 Heat Press Machine Digital Transfer Sublimation T-Shirt Mug Hat USA

15x12 5in1 Heat Press Machine Digital Transfer Sublimation T-Shirt Mug Hat USA

15x12 5in1 Heat Press Machine Digital Transfer Sublimation T-Shirt Mug Hat USA

15x12 5in1 Heat Press Machine Digital Transfer Sublimation T-Shirt Mug Hat USA

15x12 5in1 Heat Press Machine Digital Transfer Sublimation T-Shirt Mug Hat USA

15x12 5in1 Heat Press Machine Digital Transfer Sublimation T-Shirt Mug Hat USA

15x12 5in1 Heat Press Machine Digital Transfer Sublimation T-Shirt Mug Hat USA

15x12 5in1 Heat Press Machine Digital Transfer Sublimation T-Shirt Mug Hat USA

15x12 5in1 Heat Press Machine Digital Transfer Sublimation T-Shirt Mug Hat USA

15x12 5in1 Heat Press Machine Digital Transfer Sublimation T-Shirt Mug Hat USA

AK, HI, PR, Others. This swing-away heat press boasts all of the must-have attachments. This includes flat platen, mugs and plates. It can transfer colorful pictures and characters of sublimating and dissolved printing ink onto ceramics, glasses and textiles such as cotton, flax, chemical fiber, nylon, etc. This all-in-one press can be used for T-shirts, caps, ceramic plates, ceramic tiles, mugs, coasters, mouse pads, jigsaw puzzles, lettering, other misc. The swing-away heat press boasts all of the must-have attachments. It has a built-in Teflon coated 15″ x 12″ (38 x 29cm) heat platen with a full range of heating coils to allow for consistency throughout its surface. The digital timer control is adjustable up to 999 seconds. The features a digital temperature gauge ranging from 0 – 250ºC (about 480ºF). The item “15×12 5in1 Heat Press Machine Digital Transfer Sublimation T-Shirt Mug Hat USA” is in sale since Wednesday, January 13, 2021. This item is in the category “Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Heat Transfer\Presses”. The seller is “zaraa3708″ and is located in Walnut, California. This item can be shipped to United States.
  • Brand: Unbranded
  • MPN: Does Not Apply

15×12 8in1 Combo Heat Press Transfer Machine Sublimation T-shirt Mug Plate Hat

15x12 8in1 Combo Heat Press Transfer Machine Sublimation T-shirt Mug Plate Hat

15x12 8in1 Combo Heat Press Transfer Machine Sublimation T-shirt Mug Plate Hat

15x12 8in1 Combo Heat Press Transfer Machine Sublimation T-shirt Mug Plate Hat

15x12 8in1 Combo Heat Press Transfer Machine Sublimation T-shirt Mug Plate Hat

15x12 8in1 Combo Heat Press Transfer Machine Sublimation T-shirt Mug Plate Hat

15x12 8in1 Combo Heat Press Transfer Machine Sublimation T-shirt Mug Plate Hat

15x12 8in1 Combo Heat Press Transfer Machine Sublimation T-shirt Mug Plate Hat

15x12 8in1 Combo Heat Press Transfer Machine Sublimation T-shirt Mug Plate Hat

15x12 8in1 Combo Heat Press Transfer Machine Sublimation T-shirt Mug Plate Hat

15x12 8in1 Combo Heat Press Transfer Machine Sublimation T-shirt Mug Plate Hat

15x12 8in1 Combo Heat Press Transfer Machine Sublimation T-shirt Mug Plate Hat

15x12 8in1 Combo Heat Press Transfer Machine Sublimation T-shirt Mug Plate Hat

This 8 in 1 heat press machine can be used for T-shirts, caps, ceramic plates, ceramic tiles, mugs, coasters, mouse pads, jigsaw puzzles, lettering, other misc. It can transfer colorful pictures and characters of sublimating and dissolved printing ink onto ceramics, glasses and textiles such as cotton, flax, chemical fiber, nylon, etc. This all-in-one press includes flat platen, mugs and plates. The swing-away heat press boasts all of the must-have attachments. It has a built-in Teflon coated 12″ x 15″ (29X38cm) heat platen with a full range of heating coils to allow for consistency throughout its surface. The digital timer control is adjustable up to 999 seconds. The features a digital temperature gauge ranging from 0 – 250ºC (about 430ºF). Large 12″ x 15″ transfer element – The 12″ x 15″ (29X38cm) heat platen provides a big surface to transfer onto flat surfaced items such as T-shirts, ceramic plates, mouse pads, jigsaw puzzles etc. Digital LED controller – Preset the desired temperature and timer. Intelligent audible alarm after the transfer done. Full 360-degree rotation of swing-away design – Allows the heating element to be moved safely aside and reduce the chances of accidental contact. Full-range pressure-adjustment knob – This allows the pressure to be adjusted according to the thickness of the material you’re transferring to. Teflon-coated platen press element – The surface is non-stick, preventing scorching of transfers, and does not require a separate silicone/teflon sheet. 2 4/5 Long arm handle – Comfortable rubber grip for everyday use and long production runs. Detachable lower platform – It is elevated with dual supports. Adjustable multi-spring balancer – Allows pressure to be more evenly distributed across the entire platen when it is closed. 4/5 thick heating board – Built-in structural support to maintain flatness. Warm up quickly and offer even heating. Upgraded aluminium alloy cradle – Detached cradle for use of the mug elements. Compact size and lightweight, as compared to standard mug cradles. This heat press machine enjoys multifunctions in one machine, it can be used for transferring on t-shirt, mug, plate, cap and so on. Moreover the heating accessory can be joined. It can swing-away 180 degrees and is convenient to take off the transferred materials and can be used for transferring on certain thick materials. You can replace the heating plate easily and conveniently without using any special tools. Large 12″ x 15″ (38X29cm) transfer element. Digital LED temperature and time controller. Full 360-degree rotation of swing-away design. Fahrenheit and Celsius scale are selectable. Teflon-coated platen press element. 2 4/5 Long arm handle. 4/5 thick heating board. Upgraded aluminium alloy cradle. Metal and plastic construction. Built-in fuse for safe using. Adjustable feet for unevenly floor. Combo type, it could transfer images to T-shirt, mug, plate, cap and so on. Digital control ensures the high precision and sensitivity. The changing among the spare parts is available when necessary. High precise automatic digital tempreture indicator. Heating coil and heating panel are integrated, safe and durable. Issues with certain thickness can also be transferred. Adopting advanced technology and good material for better effect. Swing-away design and more even pressure guarantees your perfect printing. T-shirts, cups and hats are NOT included. Model : Heat Press Machine. Dimension : 15 1/4″L x 15″W x 17H. Platen Press : 12″ x 15″(38X29cm). Hat/Cap Press : 6″x 3″/ 15cmx8cm (curved). Mug Press #1: 7.5-9.0cm diameter (11Oz). Mug Press #2: 5.0-7.5cm diameter (10Oz). Mug Press #3: 9.0-H9.8cm latte mug (Cone) (12Oz). Mug Press #4: 8.8-H14.8cm latte mug (Cone) (17Oz). Plate Press #1: 5 max diameter. Plate Press #2 : 6 max diameter. Temperature range : 0 – 480F (0 – 250C). Power input : 110V (US Plug). Cord length : 4.5. Adjustable height : 13 1/2″ to 17″. Fully-assembled machine with platen press x 1. Hat press x 1. Mug press x 4. Plate presses x 2. Silicone pad x 1. Cotton pad x 1. US Plug x 1. We have warehouses in the USA. E-mails are answered Monday through Saturday. Please allow up to 48 hours for a response to your message. The item “15×12 8in1 Combo Heat Press Transfer Machine Sublimation T-shirt Mug Plate Hat” is in sale since Thursday, August 27, 2020. This item is in the category “Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Heat Transfer\Presses”. The seller is “heatransferpro” and is located in Flanders, New Jersey. This item can be shipped to United States.
  • Application Type: Mug/Plate (Dinnerware)/T-Shirts/Hats/Mugs
  • Automation Type: Semi-Auto
  • Brand: Bettersub
  • Bundle Description: Yes
  • Custom Bundle: Yes
  • Material: Metal
  • Model: XY-008-8in1
  • MPN: Does Not Apply
  • Mug Press #1: 2″-2.95″ diameter (10OZ)
  • Mug Press #2: 3″-3.5″ diameter (11OZ)
  • Mug Press #3: 12OZ latte mug (Cone)
  • Mug Press #4: 17OZ latte mug (Cone)
  • Plate Press #1: 5″ Max Diameter
  • Plate Press #2: 6″ Max Diameter
  • Platen Press (Telfon-Coated): 12″ x 15″ (29 x 38cm)
  • Press Size: 12 x 15 in
  • Press Style: Swing-arm
  • Timer control: 0 – 999 seconds
  • Type: 8 in 1 Multifunctional
  • Voltage: 110V
  • Warranty: 2 Years
  • Wattage: 1000W

15×12 5in1 Heat Press Machine Swing Away Sublimation Transfer Mug T-Shirt Hat

15x12 5in1 Heat Press Machine Swing Away Sublimation Transfer Mug T-Shirt Hat

15x12 5in1 Heat Press Machine Swing Away Sublimation Transfer Mug T-Shirt Hat

15x12 5in1 Heat Press Machine Swing Away Sublimation Transfer Mug T-Shirt Hat

15x12 5in1 Heat Press Machine Swing Away Sublimation Transfer Mug T-Shirt Hat

15x12 5in1 Heat Press Machine Swing Away Sublimation Transfer Mug T-Shirt Hat

15x12 5in1 Heat Press Machine Swing Away Sublimation Transfer Mug T-Shirt Hat

15x12 5in1 Heat Press Machine Swing Away Sublimation Transfer Mug T-Shirt Hat

15x12 5in1 Heat Press Machine Swing Away Sublimation Transfer Mug T-Shirt Hat

15x12 5in1 Heat Press Machine Swing Away Sublimation Transfer Mug T-Shirt Hat

15x12 5in1 Heat Press Machine Swing Away Sublimation Transfer Mug T-Shirt Hat

15x12 5in1 Heat Press Machine Swing Away Sublimation Transfer Mug T-Shirt Hat

15x12 5in1 Heat Press Machine Swing Away Sublimation Transfer Mug T-Shirt Hat

This 5 in 1 heat press machine can be used for T-shirts, caps, ceramic plates, ceramic tiles, mugs, coasters, mouse pads, jigsaw puzzles, lettering, other misc, fabrics & materials. It can transfer colorful pictures and characters of sublimating and dissolved printing ink onto ceramics, glasses and textiles such as cotton, flax, chemical fiber, nylon, etc. This all-in-one press includes flat platen, mugs and plates. The swing-away heat press boasts all of the must-have attachments. It has a built-in Teflon coated 15″ x 12″ (38 x 29cm) heat platen with a full range of heating coils to allow for consistency throughout its surface. The digital timer control is adjustable up to 999 seconds. The features a digital temperature gauge ranging from 0 – 250 (about 480). 5 in 1 Heat Press Machine = Heat Press Machine (29cm38cm) + 1x mug press Heater (11Oz) + 2x plate press machine(12.5cm/15cm) + 1x Cap Mat Press (8x15cm). This 5-in-1 heat press machine can transfer colorful pictures and characters (via sublimation ink/pigment ink and sublimation paper/heat transfer paper) onto ceramics, glasses and textiles such as polyester, cotton, flax, chemical fiber etc. It can be used for T-shirts, mouse mats, jigsaw puzzles, door hangers, ceramic tiles, ID badges, coasters, floor mats and just about every other in flat surface. Voltage: 110V (US Plug). Temperature range: 0-480°F / 0-250. Time control range: 0-999 Sec. Temperature error band: +/-5 degrees. Heater size for t shirt: 2938cm. Heater size for mug: 11oz cone. Heater size for plate: 12.5cm & 15cm. Heater size for cap: 815cm. Large 12 “x 15″ (29cm38cm) transfer element. Digital LED temperature and time controller. Full 360-degree rotation of swing-away design. Intelligent audible alarm after the transfer done. Fahrenheit and Celsius thermometer selectable. Pressure adjustment over the entire bandwidth. Teflon-coated pot-pressing member. 2 4/5 Langarmgriff. Removable bottom platform. Adjustable multi-spring balancer. 4/5 thick hot plate. Cradle with improved aluminum alloy. Metal and plastic construction. Built-in fuse for safe use. Adjustable feet for unevenly floor. Allows the heating element to be moved safely aside. Full-range pressure-adjustment knob. Can be adjusted according to the thickness of the material. Prevents scorching of transfers. Awfully simple operation. Draw down the handle and wait until it alerts 2 4/5 Long arm handle. Comfortable rubber grip for everyday use and long production runs. Removable silicone pad and cotton pad. Detachable lower platform. It is elevated with dual supports. 1 x fully Assembled Machine with platen press. 1 x Cap presses. 2 x Plate presses. 1 x Removable silicone pad and cotton pad. 1 x US Plug. 1 x Manual. T-shirts, cups and hats are NOT included. We have warehouses in the USA. Please contact our customer service team immediately if. You changed your mind and wish to request a return. Your product was damaged during transit. Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We will require a picture of the damaged part for verification. E-mails are answered Monday through Saturday. Please allow up to 48 hours for a response to your message. The item “15×12 5in1 Heat Press Machine Swing Away Sublimation Transfer Mug T-Shirt Hat” is in sale since Thursday, November 5, 2020. This item is in the category “Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Heat Transfer\Presses”. The seller is “heatpress_pro” and is located in Hebron, Kentucky. This item can be shipped to United States.
  • Model: XY-008-5in1
  • Custom Bundle: Yes
  • Press Style: Swing-arm
  • Press Size: 12 x 15 in
  • Material: Steel
  • Application Type: T-shirts/Garments/Hat/Cap/Plate
  • Type: 5 in 1 Multifunctional
  • Features: Digital Display
  • EAN: Does Not Apply
  • Heater size for cap: 8*15cm
  • MPN: Does Not Apply
  • Heater size for mug: 11oz cone
  • Heater size for plate: 12.5cm & 15cm
  • Heater size for t shirt: 12x15inch
  • Power: 1000W
  • Temperature error band: +/-5 degrees
  • Temperature range: 0-399
  • Time control range: 0-999 Sec
  • Timer control: 0 – 999 seconds
  • UPC: Does Not Apply
  • Automation Type: Semi-Auto
  • Brand: BetterSub
  • Bundle Description: Yes
  • Voltage: 110V

5in1 15×12 Heat Press Machine Sublimation Machine Digital T-Shirt Hat Plate Mug

5in1 15x12 Heat Press Machine Sublimation Machine Digital T-Shirt Hat Plate Mug

5in1 15x12 Heat Press Machine Sublimation Machine Digital T-Shirt Hat Plate Mug

5in1 15x12 Heat Press Machine Sublimation Machine Digital T-Shirt Hat Plate Mug

5in1 15x12 Heat Press Machine Sublimation Machine Digital T-Shirt Hat Plate Mug

5in1 15x12 Heat Press Machine Sublimation Machine Digital T-Shirt Hat Plate Mug

5in1 15x12 Heat Press Machine Sublimation Machine Digital T-Shirt Hat Plate Mug

5in1 15x12 Heat Press Machine Sublimation Machine Digital T-Shirt Hat Plate Mug

5in1 15x12 Heat Press Machine Sublimation Machine Digital T-Shirt Hat Plate Mug

5in1 15x12 Heat Press Machine Sublimation Machine Digital T-Shirt Hat Plate Mug

5in1 15x12 Heat Press Machine Sublimation Machine Digital T-Shirt Hat Plate Mug

5in1 15x12 Heat Press Machine Sublimation Machine Digital T-Shirt Hat Plate Mug

5in1 15x12 Heat Press Machine Sublimation Machine Digital T-Shirt Hat Plate Mug

This 5 in 1 heat press machine can be used for T-shirts, caps, ceramic plates, ceramic tiles, mugs, coasters, mouse pads, jigsaw puzzles, lettering, other misc, fabrics & materials. It can transfer colorful pictures and characters of sublimating and dissolved printing ink onto ceramics, glasses and textiles such as cotton, flax, chemical fiber, nylon, etc. This all-in-one press includes flat platen, mugs and plates. The swing-away heat press boasts all of the must-have attachments. It has a built-in Teflon coated 15″ x 12″ (38 x 29cm) heat platen with a full range of heating coils to allow for consistency throughout its surface. The digital timer control is adjustable up to 999 seconds. The features a digital temperature gauge ranging from 0 – 250 (about 480). 5 in 1 Heat Press Machine = Heat Press Machine (29cm38cm) + 1x mug press Heater (11Oz) + 2x plate press machine(12.5cm/15cm) + 1x Cap Mat Press (8x15cm). This 5-in-1 heat press machine can transfer colorful pictures and characters (via sublimation ink/pigment ink and sublimation paper/heat transfer paper) onto ceramics, glasses and textiles such as polyester, cotton, flax, chemical fiber etc. It can be used for T-shirts, mouse mats, jigsaw puzzles, door hangers, ceramic tiles, ID badges, coasters, floor mats and just about every other in flat surface. Voltage: 110V (US Plug). Temperature range: 0-480°F / 0-250. Time control range: 0-999 Sec. Temperature error band: +/-5 degrees. Heater size for t shirt: 2938cm. Heater size for mug: 11oz cone. Heater size for plate: 12.5cm & 15cm. Heater size for cap: 815cm. Large 12 “x 15″ (29cm38cm) transfer element. Digital LED temperature and time controller. Full 360-degree rotation of swing-away design. Intelligent audible alarm after the transfer done. Fahrenheit and Celsius thermometer selectable. Pressure adjustment over the entire bandwidth. Teflon-coated pot-pressing member. 2 4/5 Langarmgriff. Removable bottom platform. Adjustable multi-spring balancer. 4/5 thick hot plate. Cradle with improved aluminum alloy. Metal and plastic construction. Built-in fuse for safe use. Adjustable feet for unevenly floor. Allows the heating element to be moved safely aside. Full-range pressure-adjustment knob. Can be adjusted according to the thickness of the material. Prevents scorching of transfers. Awfully simple operation. Draw down the handle and wait until it alerts 2 4/5 Long arm handle. Comfortable rubber grip for everyday use and long production runs. Removable silicone pad and cotton pad. Detachable lower platform. It is elevated with dual supports. 1 x fully Assembled Machine with platen press. 1 x Cap presses. 2 x Plate presses. 1 x Removable silicone pad and cotton pad. 1 x US Plug. 1 x Manual. T-shirts, cups and hats are NOT included. We have warehouses in the USA. Please contact our customer service team immediately if. You changed your mind and wish to request a return. Your product was damaged during transit. Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We will require a picture of the damaged part for verification. E-mails are answered Monday through Saturday. Please allow up to 48 hours for a response to your message. The item “5in1 15×12 Heat Press Machine Sublimation Machine Digital T-Shirt Hat Plate Mug” is in sale since Saturday, November 7, 2020. This item is in the category “Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Heat Transfer\Presses”. The seller is “bettersub” and is located in Houston, Texas. This item can be shipped to United States.
  • Model: XY-008-5in1
  • Custom Bundle: Yes
  • Press Style: Swing-arm
  • Press Size: 12 x 15 in
  • Material: Metal
  • Application Type: T-shirts/Garments/Hat/Cap/Plate
  • Type: 5 in 1 Multifunctional
  • Features: Digital Display
  • EAN: 0841538510971
  • Heater size for cap: 8*15cm
  • MPN: Does Not Apply
  • Heater size for mug: 11oz cone
  • Heater size for plate: 12.5cm, 15cm
  • Heater size for t shirt: 12x15inch
  • Power: 1000W
  • Temperature error band: +/-5 degrees
  • Temperature range: 0-399
  • Time control range: 0-999 Sec
  • UPC: 0841538510971
  • Automation Type: Semi-Auto
  • Brand: BetterSub
  • Bundle Description: Yes
  • Voltage: 110V

BetterSub 15×12 5 in 1 Heat Press Machine Sublimation Transfer T-Shirt Mug Cup

BetterSub 15x12 5 in 1 Heat Press Machine Sublimation Transfer T-Shirt Mug Cup

BetterSub 15x12 5 in 1 Heat Press Machine Sublimation Transfer T-Shirt Mug Cup

BetterSub 15x12 5 in 1 Heat Press Machine Sublimation Transfer T-Shirt Mug Cup

BetterSub 15x12 5 in 1 Heat Press Machine Sublimation Transfer T-Shirt Mug Cup

BetterSub 15x12 5 in 1 Heat Press Machine Sublimation Transfer T-Shirt Mug Cup

BetterSub 15x12 5 in 1 Heat Press Machine Sublimation Transfer T-Shirt Mug Cup

BetterSub 15x12 5 in 1 Heat Press Machine Sublimation Transfer T-Shirt Mug Cup

BetterSub 15x12 5 in 1 Heat Press Machine Sublimation Transfer T-Shirt Mug Cup

BetterSub 15x12 5 in 1 Heat Press Machine Sublimation Transfer T-Shirt Mug Cup

BetterSub 15x12 5 in 1 Heat Press Machine Sublimation Transfer T-Shirt Mug Cup

BetterSub 15x12 5 in 1 Heat Press Machine Sublimation Transfer T-Shirt Mug Cup

BetterSub 15x12 5 in 1 Heat Press Machine Sublimation Transfer T-Shirt Mug Cup

This 5 in 1 heat press machine can be used for T-shirts, caps, ceramic plates, ceramic tiles, mugs, coasters, mouse pads, jigsaw puzzles, lettering, other misc, fabrics & materials. It can transfer colorful pictures and characters of sublimating and dissolved printing ink onto ceramics, glasses and textiles such as cotton, flax, chemical fiber, nylon, etc. This all-in-one press includes flat platen, mugs and plates. The swing-away heat press boasts all of the must-have attachments. It has a built-in Teflon coated 15″ x 12″ (38 x 29cm) heat platen with a full range of heating coils to allow for consistency throughout its surface. The digital timer control is adjustable up to 999 seconds. The features a digital temperature gauge ranging from 0 – 250 (about 480). 5 in 1 Heat Press Machine = Heat Press Machine (29cm38cm) + 1x mug press Heater (11Oz) + 2x plate press machine(12.5cm/15cm) + 1x Cap Mat Press (8x15cm). This 5-in-1 heat press machine can transfer colorful pictures and characters (via sublimation ink/pigment ink and sublimation paper/heat transfer paper) onto ceramics, glasses and textiles such as polyester, cotton, flax, chemical fiber etc. It can be used for T-shirts, mouse mats, jigsaw puzzles, door hangers, ceramic tiles, ID badges, coasters, floor mats and just about every other in flat surface. Voltage: 110V (US Plug). Temperature range: 0-480°F / 0-250. Time control range: 0-999 Sec. Temperature error band: +/-5 degrees. Heater size for t shirt: 2938cm. Heater size for mug: 11oz cone. Heater size for plate: 12.5cm & 15cm. Heater size for cap: 815cm. Large 12 “x 15″ (29cm38cm) transfer element. Digital LED temperature and time controller. Full 360-degree rotation of swing-away design. Intelligent audible alarm after the transfer done. Fahrenheit and Celsius thermometer selectable. Pressure adjustment over the entire bandwidth. Teflon-coated pot-pressing member. 2 4/5 Langarmgriff. Removable bottom platform. Adjustable multi-spring balancer. 4/5 thick hot plate. Cradle with improved aluminum alloy. Metal and plastic construction. Built-in fuse for safe use. Adjustable feet for unevenly floor. Allows the heating element to be moved safely aside. Full-range pressure-adjustment knob. Can be adjusted according to the thickness of the material. Prevents scorching of transfers. Awfully simple operation. Draw down the handle and wait until it alerts 2 4/5 Long arm handle. Comfortable rubber grip for everyday use and long production runs. Removable silicone pad and cotton pad. Detachable lower platform. It is elevated with dual supports. 1 x fully Assembled Machine with platen press. 1 x Cap presses. 2 x Plate presses. 1 x Removable silicone pad and cotton pad. 1 x US Plug. 1 x Manual. T-shirts, cups and hats are NOT included. We have warehouses in the USA. Please contact our customer service team immediately if. You changed your mind and wish to request a return. Your product was damaged during transit. Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We will require a picture of the damaged part for verification. E-mails are answered Monday through Saturday. Please allow up to 48 hours for a response to your message. The item “BetterSub 15×12 5 in 1 Heat Press Machine Sublimation Transfer T-Shirt Mug Cup” is in sale since Sunday, November 15, 2020. This item is in the category “Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Heat Transfer\Presses”. The seller is “bettersub” and is located in Hebron, Kentucky. This item can be shipped to United States.
  • Model: XY-008-5in1
  • Custom Bundle: Yes
  • Press Style: Swing-arm
  • Press Size: 12 x 15 in
  • Application Type: Cap/Hat/T-shirt/Mugs/Plates
  • Type: 5 in 1 Multifunctional
  • Features: Digital Display
  • EAN: 0841538510971
  • Heater size for cap: 8*15cm
  • MPN: Does Not Apply
  • Heater size for mug: 11oz cone
  • Heater size for plate: 12.5cm, 15cm
  • Heater size for t shirt: 12x15inch
  • Power: 1000W
  • Temperature error band: +/-5 degrees
  • Temperature range: 0-399
  • Time control range: 0-999 Sec
  • UPC: 0841538510971
  • Automation Type: Semi-Auto
  • Brand: BetterSub
  • Bundle Description: Yes
  • Voltage: 110V